Forum Replies Created
-
Posts
-
Re: Lamona HJA 4620 Double Oven s/n 1010150406
Yes seems good, all “fingers” in place and in good condition.
Re: Lamona HJA 4620 Double Oven s/n 1010150406
Nope, didnt need to as tried the oven with elements disconnected – still trips.
Just had a thought – wonder if the oven stat is shorting – didnt try that as never had that fault before.
Re: Baumatic BDWI660 – element only ??
Thanks for answers guys, defo not a flow through, has a complete assembly like a bosch, but the element has regular spade ends like a washing machine element, looks to me like it should be able to be removed from the assembly separately.
Baumatic spares hop has been removed from the Baumatic site !
Re: Miele G1173Vi Dishwasher alarm
I said to the customer, Im not sure it knows its empty – thought pressure switch but didnt want to rip apart her bespoke kitchen without at least a good guess.
Is it a standard diaphragm type switch ? where is it located in the machine ?Thanks for your help
Re: Miele G1173Vi Dishwasher alarm
Hi Larry, did you resolve this problem ? I have the same error on a job.
cheers
Re: Miele W863 Inlet light flashing
Hi Dave, tried the water dumping trick – still same error, machine fills but after about 3″ secs check inlet flashes and jumps to final/crease guard and pumps out ?
Thanks again
Re: Miele W863 Inlet light flashing
Will get the customer to try before I buy the valve – how do you suggest they fill it, with a slow running hosepipe maybe ?
I have to admit the machine was full of clothes when I was there so the water did show in the window pretty quickly.
Re: Miele W863 Inlet light flashing
Thanks for reply dave. As you look at draw no water is coming to right hand side, would you expect all valves to be open on ?
Re: Zanussi zwf16070w – stops on spin cycle PNC 914521429
Thanks Martin, but surely this would show up earlier in the cycle ?
Re: Electrolux EWX14450W Tripped rcd now no power to dryer
Most grateful – mitch@amg-electrical.co.uk
Re: Electrolux EWX14450W Tripped rcd now no power to dryer
Yes I know these elements are dodgy, but there is no power to the dryer element – its the new style with crimped connectors not spade ends.
gadget
Re: Aqualtis AQCF952BI not drying efficiently
Ahh now I know about blocked condensers on washer/dryers haha
So my question still stands folks – any ideas ?
gadget
Re: Aqualtis AQCF952BI not drying efficiently
Thanks Martin. Not knowing much about condenser machines, how would I cure this, is it just a case of cleaning the condenser – theyt tell me they have been emptying water out regularly so I over ruled this from the start.
cheers
