[gadgetdad]

Re: Baumatic Now Recruiting Nation wide

Well have emailed my cv twice and no reply – called to chat to HR and told they were not taking calls regarding vacancies !!

Anyone know if they have recruited yet ?

cheers

[gadgetdad]

Re: AEG DOUBLE OVEN D5701-4-M E025 / E021 ERROR

Thanks for reply PNC is 944171272 cheers.

[gadgetdad]

Re: ZWD1262S NO DRYER HEAT

Thanks Martin – guess what I will be doing tomorrow !!

(yes its an NTC)

Cheers

[gadgetdad]

Re: BOSCH SE64630GB/29 START CAPACITOR

Thanks Don, should have thought of that !!

gadget

[gadgetdad]

Re: Whirlpool – AWO/D4605

I did count them but it not a count just a continuous flash – no pauses !!

Wheres the list of codes please.

gadge

[gadgetdad]

Re: AMICA AWCT10L ERROR CODES

Yep – replaced module – happy customer again.

Cheers.

[gadgetdad]

Re: BEKO WMA667

Guys, replaced module and off it went – all good.

How do I get into diags – for future info ?

gadge

[gadgetdad]

Re: BEKO WMA667

Is that a defo – just about to order board. Machine is in a cupboard so couldnt get it out to get under it !

[gadgetdad]

Re: BEKO WMA667

Thanks guys.

Just popped in to this machine – put it on spin and it fires up for about 20 secs then stops and so does the drain pump – board problem do you think ? Washes and drains fine.

gadge

[gadgetdad]

Re: BEKO WMA667

Had them run a drain cycle while I was on the phone – drained no problem.

[gadgetdad]

Re: BELLING 335si no main oven or both left hand plates

Thanks guys, test both the inline thermal fuses for continuity – both fine so going to revisit on monday with a Beko terminal block.

[gadgetdad]

Re: BELLING 335si no main oven or both left hand plates

Hi guys, two replies along the same lines – is this a known problem then (not to me obviously) !

gadget

ps – can anyone point me at a suitable terminal block – I think Beko one might do.

[gadgetdad]

Re: contracts pacifica group

Went to see these guys recently. They pay £24 per call for their warranty work – argos rubbish and other nasty low end stuff, they supply parts or you supply at trade plus 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. No call vetting so you dont really know what you are walking into so impossible to have the right parts with you so you have to visit to find out, then order from them, then go back and replace – seems like two visits at least – £12 per !! then they have “cash” jobs – domestic jobs who have called them up – they charge customer £50 + vat, you get half plus you can charge customer for parts – if you dont convert the job to a sale then you get nothing for going – basically they are offering a free call out off your back !! hmmmmm.

[gadgetdad]

Re: NEFF S5943X1GB/16 NO POWER !!

Thanks for the comments guys :

Looked for an interference suppressor but this does not seem to have one, unless it is built into the power lead but this is just listed as “power lead with terminal block” – can you explain the 20v at the switch and module – surely this is not right !

Thanks again

[gadgetdad]

Re: RANGEMASTER TIMER – 13849-072

Yep definetly, soon as i power it at the wall with the new clock in it blows – put the old clock in, which works except the lcds are blown in places so can be read – its
fine !!

[Author]

Posts