[garn]

Re: Uploading Pics

iadom wrote:I would wait a couple of weeks Garn, some parts of the avatar upload system are borked, there are some exciting things in the pipeline, well worth waiting for. 😉

Jim.
hi Chaps
Still Trying to upload my avatar Any Chance i Could Email to One Of The Mods And Shove it in for Me.

Garn computer :clown:

[garn]

Re: LPG Gas Integrated Appliances

gandh1 wrote:most hobs come supplied with lpg jet conversion kits, rather than pre-set with lpg.

ovens are even more difficult to obtain pre-converted. best option is to speak to new world a see if their new world nw60g has an lpg converson kit available. whoever you are getting to fit the hob and oven should have the relevent lpg registration so would be authorised and trained adequately to modify both items properly to standard.

Thanks mate i will look Into that.

garn…

[garn]

Re: Whats The Best Thing ?

garn wrote:Whats The Best Thing To Get Absolutely Rid Of The Smell In washers & Dishwashers Appliances ❓ .

Just Found This http://shop.ukwhitegoods.co.uk/Cleaning … 20Kit.html

[garn]

Re: hotpoint wma40

HotDog wrote:are you still at job

No Mate Left The Job My Dongle Gave Up The Module had Gone Anyway Plus The bearing.
Sold Them A Nice Reliable Bosch Instead 🙂

Cheers garn

[garn]

Re: hotpoint wma40

Hi Does Anyone Have The Module Conflagration Codes For This Appliance Hotpoint WMA40.
I have Hotoint WMA 30 To 33 Codes can I Use Theses ❓ .

Stuck hear On The Job With my Laptop :rolls:

Garn…

[garn]

Re: Baumatic appliances

done Some Work On There Integrated dryers.
Basically there A White Night With A Baumatic appliances Badge On it Looked Up for parts for Them They come a At A Pritty Premium.

The Alternative Parts Are Offered at A reduced rate And Its The Genuine White Night Part 😮 .

Garn

[garn]

Re: What do you carry?

The Whole Workshop is mobile with me 2040KG Absolutely Crammed Packed with stock. Always Try And complete The Repair On One Run

I Thought Of Upgrading To a Small 7.5 ton Lorry I could Fit A Mobile Kitchen Display To sell The New Appliances On The job To 😉

Garn

[garn]

Re: Stuck On My 1st Moon

Fixed It
Dry Joint On The Module.

[garn]

Re: Stuck On My 1st Moon

The Door Lock Light Is Rapid Flashing Allong With A White One.
Any Clues :bang:

[garn]

Re: Uploading Pics

I Would like my own avatar Iv Managed to impose A Pic of my Van Over The front Of a Washing Machine which is Full Of Water With The door Bursting Open And My Van Riding The flood 🙂 .

Would it be posible to upload it as my avater

Garn

[garn]

Re: Masterpart Confused Hotpoint condenser heater spares

RocketMan wrote:have you got full model no or c code??

The Model Is A Indersit IDC75UK

[garn]

Re: service m6160 S. Switch Knob

hyg-dip wrote:Hi

Plenty in stock at AWS Appliance Spares Ltd 01603 412324

Andy

Thanks mate Il Get on to Them.

garn

[garn]

Re: Scrap Stainless

robbra wrote:Two Hotpoint First Editions to scrap today, minus motors £20. I’m happy 😆

Scraped 4 today 1x servis zanussi hotpoint and a hec = £51 without The motors.
equivalent To £170.00 A Ton Today’s prices.

Motors .
The gypsies have offered Me Above & £280 A Ton That’s About 220 Motors
Themselves.
Apparently They are Taking Them Up To Manchester Somewhere i have No Idea What They are Getting.

❓ Anyone Know Where This Place In Manchester

garn

[garn]

Re: Hotpoint Engineer’s Quick guide

iadom wrote:Unless you have the Emit software or the hardware key then you cannot run through a test procedure, and to be honest the hardware key only tells you what the flashing lights tell you anyway.

Thanks jim.
I have The hardware key And The card reader Cost A Load of money 2years ago Never used Never Heard Of Anyone using It :rolls:

ta Paul…

[garn]

robstech wrote:Is it possible this model is aborting the spin cycle because of a too small load or an out of balance load? Have you tried spinning a test load?

The appliance is OK .

Just Wanted The Info To Access The Test Procedure for The recent WT WML version’s

Thanks Anyway garn.

[Author]

Posts