[gegsy]

Re: Problem with Siemens Fridge

You are going to need a BSH engineer to identify it more accurately as there are numerous models Im sorry.
Some have mechanical thermostats, some are electronic controlled which I imagine you have, which I think is causing your particular fault.

Greg

[gegsy]

Re: my tumble dryer not tumbling!!!!

Could be motor or some clothing gone into fan housing and has fouled the fan.
Un plug appliance before proceeding :plug:

Greg

[gegsy]

Re: Cut Out

Having read the description of fault, I would strongly advise you to cease using the gas appliance. There are a number of reasons for this fault but you will need a Corgi engineer to rectify this fault.
Find a Corgi engineer here

Greg

[gegsy]

Re: Bosch SGS5302GB/07 Not draining

If you can see the impeller via inspection cover, there is no need to access it surely.
I would look for a blockage in the drain system, from drain hose to appliance. Take left hand panel off and you will gain access there. Un plug appliance first :plug:

Greg

[gegsy]

Re: my tumble dryer not tumbling!!!!

No brushes, its an induction motor.
When you turn it to tumble, can you hear a low hum??

Greg

[gegsy]

Re: Cricket, lovely cricket.

I’d still rather watch paint dry 😆

[gegsy]

Re: Neff U1721 oven trips circuit breaker

Yes thats a great help.
The circotherm element is around £25 original p/no is 494643, if it should be the culprit.
Power off at double pole switch or fuse box before investigating further.
Greg

[gegsy]

Re: Problem with Siemens Fridge

That part model number is not enough to go off Im afraid.

Greg

[gegsy]

Re: Neff U1721 oven trips circuit breaker

I would be looking at earth leakage on the circotherm element, but without faulting it, would have to be a guess.
Can you supply full model number off appliance itself, so we can make sure we advise correct part, thanks.

Greg

[gegsy]

Re: Bosch pump.

Hi Jim
Original is 144484 £40.40 +VAT

Greg

[gegsy]

Re: Neff Hob ignition sticking on

Without a model number no idea, but would still need a corgi engineer Im afraid.

Greg

[gegsy]

Re: Neff Hob ignition sticking on

Hi
Two scenarios here 😉

1/ Hob top installed crooked when fitter did it causing knobs to chaff on aperture for knob
2/ Ignition array that sits on each gas tap, faulty

Please note that any work on this appliance must be undertaken by a Corgi engineer. Find a Corgi engineer here

Greg

[gegsy]

Re: Football

iadom wrote:I may be tweaking something if your results stay like that 😛 😆

Oooer, as long as its not my nipple 😆

Greg

[gegsy]

Re: Football

I reckon they could, If I didnt know it was my incompetence I would have said Jim had tweaked it 😆

Greg

PS – Sorted now :rolls:

[gegsy]

Re: Football

Arsenal 1 Aston Villa 1
What is going on 👿 they usually hammer em, last was 5-0

Greg

[Author]

Posts