geoff1

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 409 total)
1 2 3 4 5 6 … 26 27 28
  • Author
    Posts
  • August 20, 2013 at 9:09 pm in reply to: Samsung WF1124XAC #399822
    geoff1
    Participant

    Re: Samsung WF1124XAC

    Many thanks for your help and have sent email

    regards

    Geoff

    August 1, 2013 at 6:45 am in reply to: Hotpoint WT741 – test #398409
    geoff1
    Participant

    Re: Hotpoint WT741 – test

    Hi Dave

    Many thanks – will go back and try all versions before fitting module.
    Interested in information on high voltage as we do suffer from transformers giving out wrong voltage.

    Geoff

    July 10, 2013 at 1:17 pm in reply to: miele t230 dryer #397389
    geoff1
    Participant

    Re: miele t230 dryer

    Hi Martin

    Thanks for reply. the condensor itself is clean but suspect that this was done before I got there as the rear is full of fluff.

    How ever I have found out that unlike the hotpoint where one hole gets blocked this unit has a series of water channels built into base. If these get blocked I understand that the unit needs to be completly stripped down and the base replaced.
    Long job and expensive part. Power washing of channels does not seem to be succesful.

    awaiting customer to come back on estimate

    Geoff

    July 3, 2013 at 8:41 pm in reply to: panasonic na-147vb4w #397208
    geoff1
    Participant

    Re: panasonic na-147vb4w

    hi

    Thank for the help. will check these tomorrow

    Geoff

    December 31, 2012 at 7:49 am in reply to: Samsung spares #386499
    geoff1
    Participant

    Re: Samsung spares

    Hi Dave

    Thank you for reply. I do have the parts on back order with Connect. it is just that I find Samsung parts a nightmare on times and was looking to see if there was another supplier out there besides Connect.

    Model of the appliance is B21S6T077/XEU

    Happy new year

    Geoff

    December 24, 2012 at 3:04 pm in reply to: Health And Safety & Equality And Diversity Policy Documents. #386741
    geoff1
    Participant

    Re: Health And Safety & Equality And Diversity Policy Docume

    Hi

    As a sole trader I needed a policy but without the big price tag and found Comply UK
    I have used Andy at Comply UK for several years now not only for the original policy but for yearly updates.

    All I have had to do is send some basic information about business and about a day later you get the required paperwork all filled in ready to print off.

    Give him a try afrost@complyuk.co.uk

    Geoff

    December 20, 2012 at 2:27 pm in reply to: Hotpoint wml520 #386574
    geoff1
    Participant

    Re: Hotpoint wml520

    Hi

    MAny thanks for the additional information

    Geoff

    December 19, 2012 at 8:51 pm in reply to: Hotpoint BCI450 fault codes? #386566
    geoff1
    Participant

    Re: Hotpoint BCI450 fault codes?

    Hi Ray

    These two lights indicate that the machine has a heating fault.

    check connections and heater. If no neutral at heater after soap dispenser has opened on quick wash then it is more than likely the module

    HTH

    Geoff

    December 19, 2012 at 8:39 pm in reply to: Hotpoint wml520 #386572
    geoff1
    Participant

    Re: Hotpoint wml520

    Many thanks for reply.

    Will give that a go on Friday

    Geoff

    November 22, 2012 at 1:23 pm in reply to: IKEA Dishwasher? #385218
    geoff1
    Participant

    Re: IKEA Dishwasher?

    Could it be the RDWT160 which is made for them by Zanussi?

    Geoff

    November 13, 2012 at 4:26 pm in reply to: Hotpoint 6173 oven #384684
    geoff1
    Participant

    Re: Hotpoint 6173 oven

    Hi

    Pathfinder is showing this as c00231795 but the switch that this is fitted to is obsolete

    Geoff

    November 13, 2012 at 9:22 am in reply to: beko cda653fw/1 #384647
    geoff1
    Participant

    Re: beko cda653fw/1

    Hi

    evap sensor is 4394720185
    air sensor is 4394720285

    will need something like hot air gun to heat up sleeves to seal joints.

    Geoff

    November 8, 2012 at 1:23 pm in reply to: TECNIK HB9TI50GB/10 MAIN OVEN FAN MOTOR #384477
    geoff1
    Participant

    Re: TECNIK HB9TI50GB/10 MAIN OVEN FAN MOTOR

    Hi Mark

    For that model it is 495459. an expensive bosch part

    HTH

    Geoff

    August 2, 2012 at 9:43 pm in reply to: tecnik oven door seal #378703
    geoff1
    Participant

    Re: tecnik oven door seal

    hi tom

    Try 658558 for this model – tecnik comes under the bosch group

    hope this helps

    Geoff

    August 2, 2012 at 9:35 pm in reply to: HJA6100 spares #378755
    geoff1
    Participant

    Re: HJA6100 spares

    Hi Bob

    It is made by Beko and they will have it listed as a Leisure HJA6100 product code 7219948081

    Hope this helps

    Geoff

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 409 total)
1 2 3 4 5 6 … 26 27 28