[geoff1]

Re: Zanussi ZJD1219 w/dreyer e10

Hi Alan

It may be advisable to check the condensation chamber for blockage as the pressure system looks for increasing water level at begining of drying cycle. If it does not detect this after 10mins the machine will abort. Chamber is fitted between fan motor and tub back right hand corner. Be careful to make note on how sensor in rubber pipe is fitted. must be refitted the same way ( caught once never again).

Geoff

[geoff1]

Re: 2 x White goods engineers Essex / N London Major Company

Oh yessssireeee thats Comet for sure 😉

[geoff1]

Re: Zanussi DA6152 Dish washer

Hi

Many thanks for the information – will give it a try

Geoff

[geoff1]

Re: (John Lewis W/D ) JLWD 1404

Hi John

Neutral for elements goes via cut out fitted to tunnel ( 2 fitted one live and one neutral) and then via contact 22 on pressure switch.
Could be main pcb if fan is not running as well

Hve emailed you wiring diagram so you can check module, contacts etc

Geoff

[geoff1]

Re: Hotpoint AQXXF149p

Great and thank you very much for replies.

geoff

[geoff1]

Re: Hotpoint Ew74g

Hi

Many thanks for information which is most helpful.
Yes 7 in all

again thank you

Geoff

[geoff1]

Re: Whirlpool American F’F display problem

The versions I have had (858616615010) not only does the display flicker but you can here relays clicking. Whirlpool have modified the main board ( fitted rear bottem) for this fault and depending on model you may have to change both boards.

The is a topic already started somewhere which has some of the differences on

Geoff

[geoff1]

Re: Hotpoint WML520p

Hi

Many thanks to you both for your help.
managed to get some more information this morning
You do read them from bottom to top starting with the door lock light as being number 1.
Uses 5 led’s in all and have listed the best way I can

led lit
5 4 3 2 1
FO1 off off off off on
FO2 off off off on off
FO3 off off off on on
FO4 off off on off off
FO5 off off on off on
FO6 off off on on off
FO7 off off on on on
FO8 off on off off off
FO9 off on off off on
F10 off on off on off
F11 off on off on on
F12 off on on off off
F17 on off off off on
f18 on off off on off

possible causes to these error codes are the same as the WIDL machines

hope this may help

Geoff

[geoff1]

Re: Whirlpool washer AWZ410 No Spin

Did have a dry joint on the pcb where the relay is located. resoldered and it worked fine.

Geoff

[geoff1]

Re: Hotpoint WF340 – Doing what it wants

Thank you Chris

Will give it a go

Geoff

[geoff1]

Re: Miele W806 – main wash light flashing

Hi Seamy

Many thanks for help. Will let you know how I get on

Geoff

[geoff1]

Re: Miele W806 – main wash light flashing

Hi Seamy

Thank you for coming back to me. Do you know how to reset the fault codes on this machine?

Geoff

[geoff1]

Re: Hotpoint WF321P

a small sum of £45 plus £84 ferry costs

Its nice if I can get more than 1 job a month there but it is only a small island

Geoff

[geoff1]

Re: Hotpoint WF321P

Many thanks for your speedy reply.

😳 Did not realise that I would need to check to see which motor fitted. Learnt a lesson there and as it is a ferry trip plus 4 hours travel to go and check I will order both.

Thank you again for your help

Geoff

[geoff1]

Re: Qualtex on line ordering?

Hi
Placed my first order on line Tuesday and all seem to go well!!
That is until I rang them today to ask where the order is.

I am very sorry I was told but problem with system and my order had not printed out or what ever technical terms are used. After chasing order will now be processed.

May be worth checking out any outstanding orders you may have as I was not the first today to have that problem.

Very nice lady gave me some credit on carriage costs to compensate.

Geoff

[Author]

Posts