Forum Replies Created
-
Posts
-
Re: Hotpoint 9559W – Bearings/Seals
EricG wrote:There are two bearings – a large diameter one which is the inner one and a smaller one which is the outer (I think?). The seal that I have allows the small bearing to sit in nicely but has an outer diameter which is larger than the diameter of the housing for the small bearing. It has the correct diameter to fit the inner housing (where I think a seal should go?). However if I put the seal in there then the small diameter bearing which it mates with won’t go over the shaft and the large diameter bearing is too big for the outer housing.
Is it just me that can’t understand this? 😕
Hi Eric 🙂 The largest bearing goes on the inside of the tub, followed by the seal. The smallest bearing goes on the back (outer) of the tub. The bearings need to fit in the housing tight! The seal is vastly important. The washer won’t last 2 minutes without it.
If your bearings don’t fit, I’d sugguest that you have the wrong kit 🙁 Is there a part number/description with the bearings?
Re: Grab ’em by the testimonials!
If you want Martin, I can give you the adress of a lovely lady who was my first ISE customer. She would’nt mind at all if you wrote her a letter.
Re: Another joke.
gegsy wrote:Two fish swim into a concrete wall.
One turns to the other and says “dam” 😆Two parrots are sat on a pearch. One says…
“Do you smell fish?”
A nose and a brain walk into a bar, and the barman says…
“I’m not serving you two! Your off your face, and your outta your head!”
😆
Re: Zanussi FL1085 bearings not worth repairing?
woollyjumper wrote:How much should I expect to pay to get it fixed if it is the bearings ?
£90 -£120?
Rates vary massively. You’ll need the drum support too if the barings are being changed.
woollyjumper wrote:Can anybody recommend anybody else in the Norfolk area to repair my washer machine.
Dave, the expert of such things, is on holiday this week 8) Maybe Kenny will see this and help you out? But something tells me, he’s abit busy 😕
Re: Grab ’em by the testimonials!
I got #6 last week!
This week, when I’ve been showing customers the ISE, everyone has bought the £500 Siemens. It’s the future! A £500 German tank of an ISE. £700 with 5 year cover and insatallation 😉
Re: Another joke.
😆
Penguin45 wrote:6 words
Class! :tup:
A sandwich walks into a bar, and the barman says…
“Sorry, we don’t serve food in here.”
Re: THE THINGS CUSTOMERS SAY ?
“I’m always in!”
“It’s hardley been used.”
and…
“OMG, that’s filthy, just let me clean that top…”
Re: Blomberg 1501AAA Making clunking noise
Maybe there’s a foreign body between the drums?
Or as Mr P has pointed out, maybe the heater has buckled?
Re: Zanussi WD1250 PCB
Goatboy wrote:I’ll let you know how it goes tomorrow.
I just got a phonecall from Goatboy Senior, and he’s very, very, very happy 😀 😀 😀 But not as happy as the young, new mother that can now wash!
Cheers Electro :tup:
I owe you one!
Re: Another joke.
Paddy’s pregnant sister was in a terrible car accident and went into a deep coma. After being in the coma for six months, she wakes up and sees that she is no longer pregnant; frantically, she asks the doctor about her baby.
The doctor replies, “Ma’am you had twins…… a boy and a girl. The babies are fine now however they were poorly at birth and had to be christened immediately – your brother came in and named them.”
The woman thinks to herself, “Oh suffering Jesus no, not me brother……..
He’s a clueless moron!”Expecting the worst, she asks the doctor, “Well, what’s my daughter’s
name?”“Denise ,” says the doctor.
The new mother is somewhat relieved. “Wow, that’s a beautiful name, I
guess I was wrong about my brother…… I like Denise.”Then she asks, “What’s the boy’s name?”
“Ah, he called him…
…Denephew!”Re: Zanussi WD1250 PCB
Nice 1 😀
I think we must have some missing instructions then 🙁
PM on it’s way.
Re: How smug…
Goatboy wrote:Fill a jar half full with water, then pour in some dockers. 10 should do!
Seal the top, shake well, then leave it to fester for a few days, then keep it close by.
When you’ve got the cravings, tell yourself the five good points of being a non-smoker…
1. Vastly improved health
2. Vastly improved personal hygeine
3. More money*
4. Better sex-life
5. Better tasting foodIf that fails, open the jar, and have a big stiff!
Oh yeah, and don’t attend any UKW meetings 😉
* Another good technique is to save the money you would normally spend on ciggies, and buy something nice with it (lager).
Does work :tup: Good luck Boro!
