Forum Replies Created
-
Posts
-
Re: Narrow width tumble dryer 560mm
don wrote:Perhaps it could be something in the future for ISE 💡 😉
😆
No way! Nobody really needs a shallow dryer. Just another one of Goatboy’s unique customers 😉
Thank you Don 😀
Re: Ariston Margherita 2000 (A1635). Pressure Sensor???
fig wrote:Looks like ordering off tinternet for next day delivery might be the only way 🙁
Or you need to find somebody with a shop! Alot of engineers work from home now, and don’t bother selling to the public 😕
Good luck :tup:
Re: Ariston Margherita 2000 (A1635). Pressure Sensor???
If you put your postcode into repairs@, I’m pretty sure that it will give you some telephone numbers to ring. 🙂
Re: Ariston Margherita 2000 (A1635). Pressure Sensor???
fig wrote:…the missus is shouting at me now!!!
Tell her to fix it then! 🙄
It sounds likely to need a new pressure switch, but if I was you, I’d get a professional to check the rest of the machine first, as Aristons are poorly constructed, and a blown pressure switch might of blown something else up with it?
And unplug the machine, before investigating!
Re: Blomberg 1501AAA Making clunking noise
Deeds wrote:Please tell me it’s not something very expensive or terminal.
Sorry, it sounds like the drum support is broken 🙁
If there is lateral movement of the inner drum inside the tub, it will probably be one of the legs on the drum spider that’s broken, or the bearing are goosed!
Re: Narrow width tumble dryer 560mm
I don’t think one exists 🙁
But if anyone knows, Don will :tup:
While your at it Don, is there a shallow model too?
Over-soaping!
It’s a massive problem in my area, because the water is very soft. I can imagine that the detergent section in this article will be huge 😕
Re: Another blind joke.
A woman decides to have a facelift for her 50th birthday. She spend $5,000 and feels pretty good about the results. On her way home, she stops at a news-stand to buy a newspaper. Before leaving, she says to the clerk, “I hope you don’t mind my asking, but how old do you think I am?”
“About 32,” is the reply.
“Nope! I’m exactly 50,” the woman says happily.
A little while later she goes into McDonald’s and asks the counter girl the very same question. The girl replies, “I guess about 29.”
The woman replies, “Nope I’m 50.”
Now she’s feeling really good about herself. She stops in a drug store on her way down the street. She goes up to the counter to get some mints and asks the clerk this burning question. The clerk responds, “Oh, I’d say 30 .”
Again she proudly responds, “I am 50, but thank you.”
While waiting for the bus to go home, she asks an old man waiting next to her the same question. He replies, “Lady, I’m 78 and my eye sight is going. Although, when I was young, there was a sure way to tell how old a woman was. It sounds very forward, but it requires you to let me put my hands under your bra. Then, and only then can I tell you EXACTLY how old you are.”
They wait in silence on the empty street until curiosity gets the best of her. She finally blurts out, “What the hell, go ahead.” He slips both of his hands under her blouse and begins to feel around very slowly and carefully. He bounces and weighs each breast…He gently pinches each nipple. He pushes her breasts together and rubs them against each other. After a couple of minutes of this, she says, “Okay, okay…How old am I?”
He completes one last squeeze of her breasts, removes his hands, and says, “Madam, you are 50!”
Stunned and amazed, the woman says, “That was incredible, how could you tell?’ The old man says, “promise you won’t get mad?”
“I promise I won’t.” she says.
“I was behind you in line at McDonald’s!”
Re: Hotpoint WM65 dead after overloading
Martin wrote:A physical inspection of the Timer PCB will no doubt show blackened and blown tracks adjacent the connector blocks usually?
This is always the case if the door interlock or the motor goes pop and kills the machine. But If the whole machine is dead, and the PCB physically looks ok, I think it’s time for a professional to look at the machine, to trace why it’s dead, and what caused the problem, and to make sure it won’t happen again.
Re: Sneak Peek!
:tup:
NISE!
Any chance of getting my location changed from ‘Nelson’ to ‘East Lancs’ or ‘Burnley + Pendle’ ?
Re: Hotpoint WM65 dead after overloading
Guzziman wrote:Earlier this year I replaced the brushes…
Did you use genuine brushes?
Re: Bosch washing machine – fabric conditioner not draining
Is the water actually comming through to the drawer when it’s supose to?
Have a read of this…
