Goatboy

Forum Replies Created

Viewing 15 posts - 916 through 930 (of 1,679 total)
  • Author
    Posts
  • in reply to: AEG Lavamat Fault #163661
    Goatboy
    Participant

    Re: AEG Lavamat Fault

    john wrote:…or could there be a problem on the other end of the pressure pipe?

    Sounds very likely! 🙂

    john wrote:(with the mains plug out, of course!)

    Very good! 😀

    There’s a 9 dight ‘enr’ number for any spares you need!

    in reply to: bosch wff 2001 #163656
    Goatboy
    Participant

    Re: bosch wff 2001

    tonty wrote:hi my washer is working fine apart from its not heating the water?

    Does it stick on program?

    The heater is in the tub, undernealth the inner drum. UNPLUG HE MACHINE FIRST! Don’t even think about live testing!

    But I think using Repairs@ is a better idea 😕

    in reply to: electra reversair deluxe tumble dryer 37468 Hinge problems #163647
    Goatboy
    Participant

    Re: electra reversair deluxe tumble dryer 37468 Hinge proble

    I’d recommend Repairs@ before someone loses a finger! 😯

    in reply to: Public retail forum? #163583
    Goatboy
    Participant

    Re: Public retail forum?

    OK, I’ll do it!

    Right after I finish our website, tidy the shop, tidy the store-room, tidy the basement, make some new re-cons, clean the toilet, do a stock-check, paint the shopfront, sandblast the shopfront, clean out the drains and repoint the brickwork.

    Then I’m free to give something my full attention instead of my usual two cents 😉

    in reply to: Public retail forum? #163581
    Goatboy
    Participant

    Re: Public retail forum?

    Edit – Maybe i could scan the arg*s catalogue, then put big red crosses through most of it?

    don wrote:You have my vote too :tup:

    Meh, I’m going home! 😕

    in reply to: which one? #163560
    Goatboy
    Participant

    Re: which one?

    😉

    Shame I’m so predictable!

    in reply to: Public retail forum? #163579
    Goatboy
    Participant

    Re: Public retail forum?

    Meh!

    Maybe i could scan the arg*s catalogue, then put big red crosses through everything?

    in reply to: Public retail forum? #163577
    Goatboy
    Participant

    Welcome aboard Mac!

    :tup:

    in reply to: Public retail forum? #163575
    Goatboy
    Participant

    :eeek:

    I’ve tryed to start something with my ‘Want to make a difference’ form.

    in reply to: Want To Make A Difference? #163361
    Goatboy
    Participant

    Re: Want To Make A Difference?

    kwatt wrote:…they will all be treated as confidential although if you comment I may reprint them if they’re good. 😉

    So just you are reading them Kenny?

    I’d hate for someone of a weaker disposition to read what I wrote about Indesit.

    You know all my opinions are kinda of…

    in reply to: Public retail forum? #163573
    Goatboy
    Participant

    Re: Public retail forum?

    Martin wrote:For what exactly?

    For a public retail forum, where people say ‘What’s the Ariston like?’ and ‘which dishwasher is a good one?’

    Or do they all just need to be moved into the ‘general enquires forum?

    Can they all be sorted with a huge sticky?

    Lurker aint that bad Bryan… well, ya know? But there’s similar posts everywhere.

    in reply to: Want To Make A Difference? #163360
    Goatboy
    Participant

    Re: Want To Make A Difference?

    DO THIS PEOPLE!!

    in reply to: which one? #163558
    Goatboy
    Participant

    Re: which one?

    Come on Don!

    Get all the BSH groups in there 😆

    My favourite is the Siemens.

    Note to Admin: Is it time for a Public retail forum?

    in reply to: Average Profit #163334
    Goatboy
    Participant

    Re: Average Profit

    Lawrence wrote:I try and make a clear £100 on each appliance I sell but this does include delivery, installation and disposal of old appliance…

    …if I have called to see there old machine there callout is refunded or not charged if they order there and then.

    …The likes of argos etc offer delivery within 10 days and you must have your old appliance disconnected and the services must be within a metre for them to install…Most people when confronted with a dead washer want it there and then in my experience

    :tup:

    That’s us too! Though profit is more like £80ish 😕

    We compare with the shed prices very well, and we can kick their collective monkey-ass’ when it comes to level of service 😀

    in reply to: indesit washer WD12S handle snapped off #163521
    Goatboy
    Participant

    Re: indesit washer WD12S handle snapped off

    frananne wrote:Do you think I need a complete new door or just a new handle?

    Errrr…. kinda depends on the damage? 😕

    Most times you’ll be OK with just the handle kit.

    This is a link to the handle kit in white…

    Handle Kit

    Email spares@ukwhitegoods.co.uk for a silver handle kit.

    Or click Repairs@ for an engineer to come and do it!

Viewing 15 posts - 916 through 930 (of 1,679 total)