[grooster]

Re: White Knight Tumble Dryer CL731

Thanks for all your help guys. I’ll get them ordered now.

Thanks again

Nick

[grooster]

Re: Candy CD474

Cheers for that Dave.
Its just that one of them looked like a thermistor, it was round unlike the other two and actually fixed through a rubber grommit with its head inside the dishwasher.
I suppose this could be the one that is the safety stat.

Thanks for your help Dave

[grooster]

Re: Indesit AIB 16 UK s/n 210168408

Cheers Martin,

I’ll give them a call.

Thanks

[grooster]

Re: AEG Integrated d/w 50750 VI problem

Cheers for that Dave. That will come in very handy. I’ll have a good look through it later tonight.

Thanks again

Nick

[grooster]

Re: Bosch Fridge freezer – KGV-2604-GB/05

Hi,

Just to update you. I fitted the modification (cant believe they charge £13 for whats basically a bullet connector and a print out, but thats by the by). Its worked fine, thanks for all your help.

Nick

[grooster]

Re: Bosch Fridge freezer – KGV-2604-GB/05

The bypass mod has been ordered and i’ll let you know how i get on in the next couple of days.

Cheers

Nick

[grooster]

Re: Bosch Fridge freezer – KGV-2604-GB/05

Thanks for the reply Roly. I thought the same about loss of gas or faulty compressor but with this the compressor usually gets very warm. It was cold to touch as though it hadnt been on for quite a while. About 5 minutes into my visit the machine kicked in and started pumping, but not in the fridge. Customer mentioned this is the norm.

[grooster]

Re: Zanussi WJD1257W

Thanks for your help Steve. Not the dreaded communication error. AARRGGHH.

[grooster]

Re: AEG 61300-W washing machine spinning problem

Yeah, i’ve checked all that. I think its too short a spin for even a delicate spin. It litterally only spins at 800 for about 20 seconds, then clicks on to a stop.

Thanks for your help anyway

Cheers

Nick

[grooster]

Re: Bosch condensor dryer – belt

Hi,

I take the bolt out of the fan and spray oil inside. Then i get 2 screwdrivers, long ones, one at either side of the fan blades, push them under the sides of the blades and pull each one up simultanelously, keeping quite an eaven pressure and they will start to move ever so slightly. Just keep wiggling those screwdriver up and down and it should come.

Its never let me down since i discovered it.

Hope this works for you.

Nick

[grooster]

Re: Neff Washer – W4380X1GB / 01

Hi,

Yes the reset isnt working. The selector position is the position you reset it on which is what i’ve been trying. It does fill on the rinse position (19 minutes) but when you put it on spin (13 minutes) it just pumps and stops. I cant see it being a valve because it shouldnt be filling on the 12-13 minute position as far as i know.
I’m pretty sure its the programmer but i was just a little curious about the high fill level indicator lighting up, thinking it could be a fault code.

Thanks for your help.

Regards

Nick

[grooster]

Re: Bosch Condensor dryer – WTL6106GB probem

Im not so sure its the relay, well not in the same sense as the hotpoint/creda one. When hotpoint creda fault occurs you cant start the machine again until the relay has cooled down. This Bosch machine you can start immediately, again and again.
It just looked to me like it was telling me an error code with it flashing “cupboard dry”.

I just hope Rocketman’s info will shed some light.

Thanks for all your help guys

Nick

[grooster]

Re: Bosch Condensor dryer – WTL6106GB probem

Thanks for the offer RM, a PM has been sent.

Cheers

Nick

[grooster]

Re: Bosch condensor dryer – belt

Your a star Chris.

Thanks very very much.

Nick

[grooster]

Re: Bosch condensor dryer – belt

Nobody got any ideas? looks like i’m going to have to buy a £40 belt.

Bugger…..

[Author]

Posts