[helo_75]

Re: blomberg 1305abb washer no power please any ideas need h

yup

i think youll find your door lock has got damp and it will have blown the timer

common fault im afraid , and the timer on its own is usually over £100

sorry

[helo_75]

Re: Proline TDC7A – Not heating / Am I ok to use this capaci

ah well, to be fair, generally the toc is there as protection for oveheating

now wot i gotta say to you and everybody, in the absence of no other fault, then both the stats MUST be changed

however your problem with the stat was more likely attributed to the fact that the motor wasnt running, and the toc clicked in to save any further damage, so in your case it worked

im glad this has helped you, but i must stress to others reading this post, that in the absence of another fault, both thermostats must be changed
thanx
helo

i

[helo_75]

Re: Merloni washing machine motors.

shich is why when u buy a new one from hotpoint it comes with a note in to power off and leave to discharge for 15 mins

the so called ‘supersilent’ range have these induction motors

[helo_75]

Re: Proline TDC7A – Not heating / Am I ok to use this capaci

all the new generation of merloni dryers have a 8uf cap on them, that’ll be fine

and yes, its more than likely the stats are at fault, and for some time now, the heater and stats have come as a complete unit

however, as it is unlikely to be caused by stat failure this time it is possible to reset the one shot stat ( the left one i think) and u do that by sticking a pin in the small hole on the back of the stat and ull hear a click

please ensure uve unplugged the machine

if you feel safer changing the stats, then do so, but im pretty sure on this occassion that just resetting it will suffice

hope this helps

[helo_75]

Re: Indescribablysh*t WD12S Dryer fault

wait till the machines approx 18 months old, itll be scrapped for sure, the scrap yard will turn it into a small square piece of metal able to fit in your freezer 😉

u did ask….

[helo_75]

Re: hoover t/d HNV160-80

yup, put a new motor in. its a complete thing normally

[helo_75]

Re: HOOVER HNL 9146 Z — WONT START

change the door!!!!

other than that, id check the neutral hasnt dropped from the board to the lock, thats relatively common

[helo_75]

Re: vented tumble dryer

zanussi have a side vent

ull be ok as long as you dont buy anything starting with ind, hot or cre

zanussi machines are quiet and reliable… not sure about a sensing model though

[helo_75]

Re: Advice needed on new Fridge freezer

au cointraire

that particular model has 2 different compressors, ones a turkish one, and the others an lg…

ones readily available, the other one ? u got no chance at all

still, im sure they dont all break down

[helo_75]

Re: Advice needed on new Fridge freezer

hmm, good price

did it come with a free service call to fit a compressor in 6-9 months?

😯

[helo_75]

Re: Can you recommend me a new washing machine?

didnt know crosslee made washing machines?

[helo_75]

Re: Can you recommend me a new washing machine?

hoover? british?

since when?

last time i looked, they where a gias machine, designed in italy, and not a lot different to their sister machine candy

ne1 know of a british machine?

[helo_75]

Re: Hotpoint WMA13 Module

u could, but youd need to recode it

im sure someone here has the codes

[helo_75]

Re: mistral hotpoint

model number would be helpful

[helo_75]

Re: Bosch KGN33V00GB cool air distribution question

http://www.ukwhitegoods.co.uk/modules.p … ic&t=18671

try that…

[Author]

Posts