Forum Replies Created
-
Posts
-
Re: Suppliers please?
thank you very much, about to get some forms downloaded & sent in, again cheers
Re: Hotpoint FFA91+contamination
well if you can seal it with some good tough wide tape it should be ok down there, as its a frost free you souldn’t get any moisture into it if it seals well
Re: Suppliers please?
Hi, thanks dave, yeah i checked the list at the top but just wondered if there were any main ones with good websites? also the link you gave wont work, (unless you want to give me your a/c number & password??? 😉 )
Re: Hotpoint FFA91+contamination
hi, just a quick thought, if the splits are not too big i have seen them bridged with thick Duck tape, it dont look pretty but if someone wants a real cheap freezer then it can do the trick,
Re: Ariston Margherita 2000 – I also have a problem!
just one more thing, WITH THE PLUG OUT make sure the heater wires are not broken/burnt, can cause 8 flashes, but it is usually the board
Re: Ariston Margherita 2000 – I also have a problem!
it depends, origional ones were soldered in place, now they plug in
Re: Ariston Margherita 2000 – I also have a problem!
yes thats the module, but it also needs a programmed eeprom to be fitted as the same module can fit many machines
Re: Ariston Margherita 2000 – I also have a problem!
hi craig, sorry but your control board is shot!
Re: Hotpoint WD860 Dryer no heat
well the latest (3rd) type of heatbox have the cut-out cable with the thermal fuse section clamped down hard, with a metal clip, to the top of the box, above the heater & centrally over the element so that it can detect any excess rise in the element temperature (like blockage or fan failure)
Re: Hotpoint WD860 Dryer no heat
well that’t be up to you, the part for the thermal cut-out is the same as the indesit one (c00080775) hovever there would be no clamp for it, plus i do not know if the heat box would be the same thickness (to ensure the excess heat can fuse the link if it needs to)
