Forum Replies Created
-
Posts
-
Re: Testing 1, 2, 3…
http://tinyurl.com/r63kn
item #2.What will be on here is reviews of the products from the engineer’s perspective and, hopefully, consumer’s comments as well.
Tut tut, it should read,What will be on here are reviews,
#15 The answer includes a hyperlink that takes you to a page of plain text, not a pop up window.
Item #8. You really didn’t want to say rapair did you, đ
Jim.
Re: Hotpoint WD420P drying element not heating up
Depending on the age of your machine, if you just change the stat you will keep having problems, the kit includes all that is needed to modify this Indesit heater box. This does seem to be a successful modification.
If in doubt post up the full serial number and we will be able to advise further.
Jim.
Re: Hotpoint WF000 winking at me.
Known error codes thread, page#4 post#5.
You need to check the number of the neon, they do have different functions on some machines but the codes are the same.
Jim.
Re: Ariston/Hotpoint module wiring
Will see what I can do, personal problems ATM, family bereavement.
Jim.
Re: Testing 1, 2, 3…
From the FAQ’s section…… This is so messy.
Because some beurocrat decided that we cannot as, now, if anything goes wrong and you do something wrong either in error or because of a disability that you may have like colourblindness then the person who gave that advice is personally liable for any injury or death arising from that. This is the reason that getting technical information from many manufacturers is difficult at best, even for the trade and can cause delays with repairs.
But the beurocrat spelling is only one glaring error in this passage.
PS. Its… bureaucrat.
It would be better if it read something like,
Because some faceless EU official has decreed that we cannot give this advice, just in case something goes wrong, or you make a mistake either in error or because of a disability that you may have such as colour blindness. If that happens then the person that gave that advice is personally liable for any injury or death arising from that. This is the reason that getting technical information from many manufacturers is difficult at best, even for the trade and can cause delays with repairs. ŠJ.Banks 2006 8)
Will have to have another look tomorrow, lots of things to sort out here ATM, đĽ
Jim.
Re: Testing 1, 2, 3…
I take it that the ‘Search’ facility is still a work in progress. Totally confusing compared with the current system.
Re: Testing 1, 2, 3…
This load of bull from DASA. đ
Description: DASA (Domestic Appliance Service Organisation) founded by Chris Hayter is the only organisation dedicated to the pursuit of standards and education within our trade.
Re: Testing 1, 2, 3…
On the Manufacturers links page it still lists GDA. As GDA has been defunct for almost two years now this could now be a good time to update this to, the Indesit (Indecent) Company Ltd.
Re: Testing 1, 2, 3…
gegsy wrote:Sorry Jim
It was the printer friendly header links thats the prob đ
http://ukwg.maad.co.uk/modules.php?name … e&artid=23Greg
See what you mean, those are borked for me as well, can you make any sense of the sub title. đ
Re: Testing 1, 2, 3…
There is a large amount of ‘white space’ either side of the content, is this going to be filled with advertising? It makes the whole thing look pale and washed out ATM.
Re: Testing 1, 2, 3…
gegsy wrote:http://ukwg.maad.co.uk/modules.php?name=Sections
When trying to get link to any category brand, it says page not found
All the links to each catagory seem to be working for me, however the sub heading makes no sense at all.???
‘Here you can find some cool articles not presents in the Home.’
WTF đ
Re: Whatever became of the Titan W/m?
It seems to make my page scroll up very slowly, did anyone mention the weight :rolls: đ
A very interesting project, I must say that Mr Myerscough is the sort of bloke you want to succeed, I warmed to him. I wish him all the best, however I still think my next machine will be an ISE.
Re: hotpoint dwm55
It appears to be part of the control module assy, not available as a separate part.
Re: UK Whitegoods September 2006
gegsy wrote:
iadom wrote:
And don’t forget the seal. đHi Jim đł
Yea It will be in post Monday without fail, may find something else for you too đGreg
Seal arrived today, a perfect fit. Pity you addressed it to Basildon Close and not Bidston Close, good job the postman knows me. đ
Couldn’t find anything else in the packet. đ
Thanks once again,
Jim.
PS. let me know what I owe you Greg.
