Forum Replies Created
-
Posts
-
Re: Testing 1, 2, 3…
Will the new site be hosted on the same servers, it doesn’t matter what it looks like if it keeps timing out or crawling as slow as ukwg’s has in the past few days. 😥
Re: Zanussi washer/dryer WDS 1183W
Removing the door seal (collar) from the cabinet will not allow you to see into the drum, removing the door seal from the outer drum will not allow this either, but if you do remove the seal, be prepared for trouble. You will find it very, very difficult to replace.
Almost all technical information is covered by manufacturers copyright so you will not be able to get detailed, exploded drawings.
In view of your earlier posts, I strongly advise you to get some pro help.
Jim.
Re: Cannot get parts for a 6 month old washing machine!!
Bill wrote:Hello,
If the machine is only 6 months old as you say call Samsung help line and have it repaired under warranty. If the person sent does not have it on the van, it only takes a day or two to come.
Bill Ellis :scot:
Would suspect that depends on how the ‘tear’ got there Bill. 😉
Re: creda dryer thermostat replacement
Behind the back panel, just above the heater. be sure to remove the plug before having a look. 😉
Re: Number 2 is watching.
Yes, but number 2 was the main enforcer, hence the connection to the mods. 8)
Re: Bosch SGS53C02GB/08 D/W
Thanks Greg, my first ever repairs@ job. need to get this one right. 🙂
Don’t think they made this model for Hotpoint, whats the base access like?
Jim.
Re: Hotpoint TC71P Condenser dryer question
Sarah,
Part number of element is a 1701584., the thermostat kit ( fails at a ratio of about 100 to 1 to elements) is a 1701583.
spares@ukwhitegoods.co.uk will be able to source these. Or follow these links, for heater.. http://shop.ukwhitegoods.co.uk/product_ … cts_id=358 for thermostats kit..
http://shop.ukwhitegoods.co.uk/product_ … ucts_id=78
Jim.PS. If you do need the element then you have got lucky, the one you need is around £25/£30 + vat. The earlier one is over £50 + vat.
Re: Hotpoint TC71P Condenser dryer question
Two different elements fitted to this model. We would need full serial number, or at least the first two numbers of same to ID correct part.
If your hubby does have the required experience, why not get him to test the element and thermostats first, with the power off of course. 😉
Re: Hotpoint dwf 30 test prog ?????
Martin wrote:
Of if only life and Hotpoint dishwashers were so simple eh? :rolls:
As the OP said, “its a Bosch” There is a basic diagnostic test (very basic) for this machine and just 3 error codes.
Will try to sort some info out for you later, but I am a bit tied up ATM.Jim.
Re: Testing 1, 2, 3…
Wait until you get older and the old photosensitive reflex kicks in, 😉
To bright, to white. 8) I will just have to put my shades on. 😆
PS. Why is there all that wasted space on either side of the screen?
jim.kwatt wrote:Jesus, everyone’s a critic! 😆
That’s my spelling/poor typing skills, what we really want to know about are functional errors or bits that just dont’ look/feel right. 😉
K.
Yep, said it once already, far to ‘white, lots of sites have similar sized empty borders but most have some sort of fill in colour. With the page background being white and the borders on both sides taking up over a third of the screen it looks washed out to me. Even the slight hint of a pastel shade would make a huge difference IMHO.
Jim.
Re: Testing 1, 2, 3…
gegsy wrote:http://ukwg.maad.co.uk/modules.php?name=Content
Installation
Advise on the general installation of appliances as well as the “do’s and don’ts”!Come on Greg, you missed the incorrect use of Advise, it should advice.
Jim.
