Forum Replies Created
-
Posts
-
Re: Hotpoint Aquarius wont tumble
I could be more precise with an exact date code, 😉
One word of advice, there is very little to service on modern machines but you should get immediate attention to a washer, tumble dryer or dishwasher if it leaks or makes any noise that is out of the ordinary.
Would you carry on driving your car without having it checked if it made a loud screeching noise, or supposing the dryer caught fire, you would feel a bit silly or even worse if neglecting to get the machine seen to was found to be the cause of a fire that burnt your house down, it has happened.
Jim.
Re: Hotpoint Aquarius wont tumble
Depending on the Date code ( first two numbers of your serial number) you may have a machine with rather horrid, noisy drum pulley type, front bearings. These have been superceded, or to be more accurate they have gone back to an earlier design of drum support bearing pads. A complete modification kit is available but it is not a simple DIY fix.
Possible that your belt has failed due to the drum binding as a result of the drum support pulleys failing. Although you do have a five year parts guarantee, a local independent engineer may just be cheaper. Check the link in my Sig to see if we have someone who can help.
Jim.
Re: hotpoint fdw65a error codes
Perhaps you should change your username to Indesit hater, it would be more accurate. 😉
Counting from the left which neons are flashing. 1+ 3, 3 + 4, 4 + 6 etc.
Re: Football
Well I was a bit peeved by the result from Lords 😥
But then I cheered up when I saw the result from Vicarage Rd
Watford 1 The Reds 2. 😀
Then I saw the result from Eastlands and I was “over the moon” 😛 😆 8)
tweak, tweak.Re: Anguis in herba
I think he is from Norn Iron. 😉 Check one of the IP’s he has posted from, a Northern Irish library. 😆
Re: Hotpoint WF430P
Re: Hotpoint WF430P
DentedPorsche wrote: And finally, anyone got an idea as to what’s wrong with this beast?
Oh. I am so tempted, 😉 😥
Re: Hotpoint SDW60 problem
That suggests a drain time out error ( it hasn’t emptied in the allotted time ) or a software recognition error.
If it is doing that at the start then it looks as though you may have problems with the electronics. Not an easy DIY fix, possibly time to call in an engineer. Check the link in my Sig to see if we have someone who can help.
Also remember that your parts are covered by a five year guarantee.Jim.
Re: Hotpoint SDW60 problem
Can you tell us which neons by number from the left are flashing?
1st,2nd,3rd for example.
Re: Cricket, lovely cricket.
Well thats a fine to do, Dozy Darrell fires off a ‘confidential’ e-mail to the ICC in a fit of pique or because of the stress from unfavourable press coverage, thinks that was a stupid act and retracts his e-mail.
The ICC think, bingo, we can hang Darrell out to dry, keep the Pakistan side sweet, save the one day series and everything will be OK. 😥
A fantastic game run by spineless crawlers. 😈
Re: Wiring and Schematic Diagrams for the public
gegsy wrote: only to gind that customer
Didn’t know you where practising ventriloquism Greg,
“Gottle o Geer, Gottle o Geer” 😆
