iadom

Forum Replies Created

Viewing 15 posts - 3,466 through 3,480 (of 25,656 total)
1 2 3 … 231 232 233 … 1,709 1,710 1,711
  • Author
    Posts
  • March 19, 2015 at 1:52 pm in reply to: Hose clips #425354
    iadom
    Moderator

    Re: Hose clips

    Likewise, keep a stock of the common, thinner jubilee clips with me, would never dream of using cable ties on internal dishwasher hoses.

    March 17, 2015 at 6:21 pm in reply to: ISE 10 heater? #425607
    iadom
    Moderator

    Re: ISE 10 heater?

    Thanks Bryan, as George is fairly local I rang him first. He thinks he has one but will let me know for certain in the morning. Will let you know if I still need one.

    Jim.

    March 17, 2015 at 5:16 pm in reply to: ISE 10 heater? #425605
    iadom
    Moderator

    Re: ISE 10 heater?

    I will ask. 🙂

    March 17, 2015 at 4:44 pm in reply to: Amica/AW23 bearings #425445
    iadom
    Moderator

    Re: Amica/AW23 bearings

    Just been back to this one, lasted just over a month. :rolls:

    The bearing seal that came with the second kit is different to the one I received last month???

    The one on the left is the new seal, as I regularly get sent the wrong bearings and on a couple of occasions the wrong seal it looks as though the stock picking gremlins have struck again. 🙁

    March 15, 2015 at 8:40 am in reply to: Zanussi condenser tumble dryer water problem #425564
    iadom
    Moderator

    Re: Zanussi condenser tumble dryer water problem

    Lie it on its back, two minutes of a job then. 😉

    March 13, 2015 at 6:53 pm in reply to: Hotpoint FDW60 module #425550
    iadom
    Moderator

    Re: Hotpoint FDW60 module

    Only one module for that one Tim as yours is actually an FDW60P.1

    C00143209.

    Jim.

    March 12, 2015 at 2:10 pm in reply to: Hotpoint WMD960 #425514
    iadom
    Moderator

    Re: Hotpoint WMD960

    is it noisy if you spin the drum by hand through door opening ? it should be virtually silent ?

    If it is noisy the main bearing will be the likely cause. quite expensive and extensive repair. 🙁

    March 11, 2015 at 8:58 pm in reply to: Hotpoint Creda SPC61 Main Oven not switching off #425453
    iadom
    Moderator

    Re: Hotpoint Creda SPC61 Main Oven not switching off

    Part number is a C00229478, cost around £25.00. You could try the ‘Find an Engineer’ facility using the SEARCH link at the top of the forum. A well built cooker which should have plenty of life left in it.

    March 11, 2015 at 3:12 pm in reply to: Hotpoint Creda SPC61 Main Oven not switching off #425451
    iadom
    Moderator

    Re: Hotpoint Creda SPC61 Main Oven not switching off

    Not at home ATM to look up part numbers etc, stat not expensive but not a simple DIY fix. Both sides have to be removed and complete hob has to be released and moved to the side.

    March 11, 2015 at 11:36 am in reply to: Hotpoint Aquarius door lock problem help #425477
    iadom
    Moderator

    Re: Hotpoint Aquarius door lock problem help

    Check the motor carbon brushes.

    March 11, 2015 at 10:10 am in reply to: Hose clips #425351
    iadom
    Moderator

    Re: Hose clips

    Or didn’t do a professional quality repair by using thin jubilee clips or correct original style clips.

    March 10, 2015 at 9:37 pm in reply to: Hotpoint Creda SPC61 timer sound not working… #425468
    iadom
    Moderator

    Re: Hotpoint Creda SPC61 timer sound not working…

    Fault can only be in the timer unit, around £75.00. 🙁

    March 10, 2015 at 10:24 am in reply to: Hotpoint Creda SPC61 Main Oven not switching off #425449
    iadom
    Moderator

    Re: Hotpoint Creda SPC61 Main Oven not switching off

    Main switch??? Basic parts diagram only shows a main oven control which is the thermostat. It doesn’t show a switch for changing between functions which is what would be called a main switch.
    It does point towards the main oven thermostat failing.

    March 9, 2015 at 10:12 pm in reply to: F2 on CD60W dryer #424986
    iadom
    Moderator

    Re: F2 on CD60W dryer

    The door seal looks a bit floppy,going to visit my new granddaughter tomorrow so will have another look. Thanks

    March 9, 2015 at 4:08 pm in reply to: Hotpoint motor #425430
    iadom
    Moderator

    Re: Hotpoint motor

    C00202516.

  • Author
    Posts
Viewing 15 posts - 3,466 through 3,480 (of 25,656 total)
1 2 3 … 231 232 233 … 1,709 1,710 1,711