iadom

Forum Replies Created

Viewing 15 posts - 3,481 through 3,495 (of 25,656 total)
  • Author
    Posts
  • in reply to: New integrated dishwasher… for rental #425416
    iadom
    Moderator

    Re: New integrated dishwasher… for rental

    bornfree wrote:

    The best one we’ve had over the years was a Zanussi – both for cleaning and reliability, but maybe things have changed. Recent experience suggests that Indesit and AEG are about as reliable as each other!

    Any AEG of the last few years is actually a Zanussi. 🙂

    in reply to: noisy machine #425091
    iadom
    Moderator

    Re: noisy machine

    Have removed the pump filter to check for obstructions ?

    iadom
    Moderator

    Re: Creda T622CW – are these stats okay and configured corre

    No you have damaged the green spot TOC by accidentally pressing the base in. It is a ‘one shot’ safety device so does not reset. It should have the same reading as the other, temperature control stat.
    The green spot should sit to the left as you look at them.

    in reply to: noisy machine #425089
    iadom
    Moderator

    Re: noisy machine

    You should upload your video to any one of the many file sharing web sites then post a link. 😉

    iadom
    Moderator

    Re: Hotpoint WDAL8640 – Rumbling goods train / steam tractor

    Hmm, pity about the holes you drilled into the cabinet. The machine should still be covered by the manufacturers five year parts warranty. They would have repaired it for labour charge only. 🙁

    in reply to: zanussi zwg1120m #425387
    iadom
    Moderator

    Re: zanussi zwg1120m

    Sent you a PM as well Cliff.;)

    in reply to: Hose clips #425346
    iadom
    Moderator

    Re: Hose clips

    lee8 wrote:Cut them with wire cutters, then seal with cable ties.

    That sort of bodge caused several disasters on Hotpoint/Indesit dishwasher tube heaters. :rolls:

    in reply to: Creda Oven 48148V Grill regulator #425367
    iadom
    Moderator

    Re: Creda Oven 48148V Grill regulator

    Listed on Partfinder as either Strix or Diamond H, it lists the Strix one as C00236014.
    There is a good chance it will be an alternative though. 🙁

    Good reference chart HERE 😉

    in reply to: Hotpoint Openspace Oven #425357
    iadom
    Moderator

    Re: Hotpoint Openspace Oven

    Model number???

    in reply to: TCL770 aquarius #425229
    iadom
    Moderator

    Re: TCL770 aquarius

    ?????
    You count the lights from the bottom up, the very top light is not used for codes. The bottom light is light 1.

    in reply to: band has come off #425304
    iadom
    Moderator

    Re: band has come off

    If the belt has come off once it will come off again in no time at all, you need a new belt.

    in reply to: indesit xwa91683x w uk door seal #425320
    iadom
    Moderator

    Re: indesit xwa91683x w uk door seal

    You will have to contact the Indesit Company, that model has not yet made it onto the official parts software.

    in reply to: In search of the fourth cord #284835
    iadom
    Moderator

    Re: In search of the fourth cord

    I did delete one from lee8 in that thread, his usual garbage, added nothing so zapped it.

    in reply to: Distripart cd? #425254
    iadom
    Moderator

    Re: Distripart cd?

    Online web portal for authorised agents. Never used Connect so don’t know if you can access some info there or not?

    in reply to: Distripart cd? #425252
    iadom
    Moderator

    Re: Distripart cd?

    If you mean the old Electrolux one, it has not been available for several years now. 🙁

Viewing 15 posts - 3,481 through 3,495 (of 25,656 total)