Forum Replies Created
-
Posts
-
Copied from user manual.
Keep an eye on children!
• Always close the door and start the programme
immediately once you have added
detergent.
• Do not allow small children to use or play
with the washing machine.
• Store detergent and fabric softener out of
the reach of children!
Automatic door opening
The machine comes with an automatic door
opening function, which means that the door
opens automatically once the programme has
finished.
If you wish to prevent small children or pets
from climbing into the machine, you can deactivate
the automatic door opening function.
1. Turn off the machine using the main power
switch.
2. Press the Door Open button while simultaneously
pressing the main power switch.
Release the buttons.
3. Press the Key button and the red field goes
out. Automatic door opening is now deactivated.
4. Press the Start/Stop button to store the
setting.
If you want to reactivate the function, follow
the instructions above. When you press the
button with the key symbol (point 3), the red
fields light up. Store the setting by pressing
the Start/stop button.So presumably you could reply to that message and no one else could see it, in other words a PM system?
I listed the possible causes in my first post, the error code means poor or no circulation, as I also mentioned a very common fault on these budget quality machines.
iadom wrote:I think Dave needs an engineer to fix his Avatar, his washer seems to have stopped working. 🙂
Actually it is working in his profile but not in the forums yet Dons little chap is merrily trotting along.
Well 5h is supposed to signify 5 hours to programme start, it can be set up to 24 hours max. Fingers crossed it is that, control boards are pricey to say the least. 🙁
don wrote:
Jim there is what looks like a log through the messages tab at the top of the page then go to Infractions. Dave and I have already made a contribution 🙂
I had spotted those, I guess an infraction is a near as we will get to a BAN button for now. 🙂
From manual.
Mesh plate, filter or microfilter, pressure switch,
circulation pump.From experience the main circulation pump is the main cause of this fault. 🙁
Just waiting to see what goes on in The War Room and The Boardroom. Do miss the moderator logs though,
Just noticed that a thread I replied to a few minutes ago was not added to my subscriptions. I had to go into my settings from the very tiny button at the very top right of the page and go to notifications and switch on auto subscribe.;)
Has someone accidentally selected a delayed start? Page 15 of the manual explains this function. To cancel you must press and hold Start/Stop button for three seconds.
I know that typos and spelling will be well down the to do list but a couple have caught my eye. Firstly on all the pages at the top it says ‘We have now upgrades’, as the s & d are side by side on the keyboard I can see how that one slipped in. The other one is rather amusing, on the main Forum home page if you go to the International forum description it says we have limited SPEARS. 🙂
