Forum Replies Created
-
Posts
-
Re: HAIER HW-C1460TVEMEU
The UNB message will clear it self and simply advises it didn’t spin properly after the fourth rinse due to a perceived Out of Balance (OOB) potential.
These units have a temperamental main PCB which senses the possible OOB and bang off it goes.
Sadly, if there is nothing obvious such as uneven floor, under loaded machine etc, it sounds like a dodgy PCB.
Regards
Jackal
Re: Teka DWF655F1(VR01) dishwasher
Kez hi
I cannot see the model listed on the Teka Techncial Website, but from the other models listed, no its a complete circ motor.
Regards
Jackal
Re: Baumatic oven leaks water
Chris77 Hi
Whats the model number of the oven. There is a known problem on some models which causes the condensation you are experiencing.
Usually it happens on the triple glazed units.
If you let me have the model number I can check if its known to it. If it is, Baumatic will arrange a service call foc to replace the top door trims and vent holes in the rear of the cavity.
Regards
Jackal
Re: Hacked Off About Internet Pricing?
DrDill wrote:If any of you had bothered to read my posts properly instead of sucking up to the great Ken Watt you would see that i have never complained about my buying in price,
We did and you said this.
DrDill wrote:As a bricks and mortar retailer i believe i should get better pricing from the manufacturer,
Sounds like a complaint to me as its clear the manufacturers you purchase from are not all that interested in capitulating to your needs otherwise I am sure they would have already.
And as you have now brought it up once again, no one here sucks up to Ken Watt, but many of us are grateful to him for spending his own money and donating his valuable time to provide us with this site, which makes life in this industry a damn site easier to deal with than it could be.
If you are unhappy at the way he or anyone else for that matter runs this forum, please don’t visit it and seek the answers to your needs elsewhere.
DrDill, as a moderator I get to see some of the comments made about both topics and indeed posters which are not generally broadcast openly. Many are calling for you to be removed from this forum as they find you rude, insulting and confrontational for no reason at all, and I will openly say, I am myself one of them.
You should be aware it is the very gentleman you insult the most whom is continuing to defy the requests of many of us because he firmly believes in the right to free speech.
So I now formally and openly ask you to moderate your posts, stop the insults and behave in manner more congenial to the precepts of this forum.
I am happy to take this to PM if you so wish.
Now please, either keep this on topic or I will arrange for it to be locked!
Best wishes and regards to all.
Jackal
Re: Hacked Off About Internet Pricing?
As both an internet retailer, multiple physical shop front retailer and service provider, I would have put my comments, thoughts and opinions into this thread, but to be honest, what’s the point when all you are going to receive is abuse and insults because one person isn’t mature enough to deal with the subject accordingly.
What a waste of a very good thread and discussion topic!
But to add a final point, when I am unhappy with my supplier about the prices I get from them and thus the margins available to me, I usually discuss it with them in an attempt to secure better pricing not moan about it to forums like this. To be honest doing so would make me look a pr4tt and achieves nothing but upset.
Jackal
Re: Baumatic BT2710SS cooker – two problems (at least!!)
Delighted you sorted it and your customers happy 😀
Jackal
Re: Baumatic BT2710SS cooker – two problems (at least!!)
Hi
I have sent all the technical info to you by email.
It will be with you in about 5 mins.
Hope it helps
Regards
Jackal
Re: PAB dishwasher
If this is a Premium Appliance Brands Limited (PABL) appliance then they are just a badge name on the front so it could be made by anyone.
Add to this that PABL went bust a couple of years ago means the older models are no longer supported spare and technical wise and the phoenix company that rose from the initial failure are probably one of the worst to get spares or technical from.
We are gonna need more info on the Product before we can assist further.
Sorry
Jackal
Re: panasonic na 14va1 error code h41
Unit is not able to ascertain the spin speed of the motor during the spin cycle.
Technical states replace the 3D sensor (PNo. AXW24N-7FH0) or Main PCB, (PNo. AXW24C-7GZ06) but I would check to ensure its pumping out correctly first.
My engineers advise that the unit tries to ramp up into spin during the pump cycle then realises its not yet empty and ramps down again. PCB cannot handle this up and downward cycle so aborts the data feed and throws error H41 at you.
Hope this helps but if you need the Service Manual, PM me and I will send it over.
Regards
Jackal
Re: diplomat ADP8342 MAIN MODULE
Available from Connect (part number 5045173370487) and no doubt others. Around £60.00 trade and £85.00 retail.
Regards
Jackal
Re: viscount cookers
Turkish made machine made by, Termikel.
Connect will have it under an equivalent Micromark model number, although if you have difficulty sourcing anything, I can supply you.
We repair them for TEJ also.
Energy regulators and hotplates are favourites to go wrong on these.
Cheap and cheerful unit.
Regards
Jackal
Re: Bush cooker AE56TW spares
Available from Connect under part number 20641225.
Unit is manufactured by Vestal
Regards
Jackal
Re: TEKNIC DISHWASHER MOD TKD7000/N.SER 000202 PROD 8401
Steve Hi
You will need to cross reference it to the original Bosch unit to get the correct part number. Do you have the full Enr Number?
Jackal
Re: Next branded W/Mach Who makes it?
Alex & K Hi
Yes the one shown by Kenneth is the correct one for this machine.
I can supply (currently no stock) if you need one, but Kenneths price is better than mine!
Alex, the exploded views and parts listing have been sent to you by email.
Regards
Jackal
