Forum Replies Created
-
Posts
-
Re: Whirplool ADG644IX configure PCB
Two boards listed for that model. 480140100536 is the configured one and 481221838522 is the blank board.
Looks like you have the wrong one..
JohnRe: Whirplool ADG644IX configure PCB
looks like there are about 12 different version of this model, do you have the 12nc number?
John
Re: MJH Aftercare
Ron told me he had stopped giving MJH work after a couple of weeks and had only given him 15-20 jobs in total, the reason he stopped giving him work was that Julian got a job for SBS through Ron and thought he would approach SBS direct and steal the work but Ron found out.
When Julian 1st approached me I did a quick check on companies house and also saw a few posts on here which convinced me to steer clear. I think we should be credit checking all future offers of work to try and stop conmen like Julian appearing again…
John
Re: Whirplool ADG644IX configure PCB
If you have bought a blank control board the only way to program it is to use a SAM module, what is the part number of the control board that you have.
John
Re: MJH Aftercare
Alex wrote:
Maybe worth trying to see if MJH were paid, and are slow in releasing to you?I just spoke to Ron at SES and he says Julian Radley called him a couple of weeks ago and said he was closing MJH down, he also said that MJH has been paid for all jobs that came from SES so it looks like no money will be forthcoming given that the phone rings out.
John
Re: Whirlpool AWO10761 parts list
Hi George,
PM me your email address and I will send the info.
John
Re: Apologies
iadom wrote:OT but is there a link to the Rapport software live yet?
Jim.
Just downloaded it and about to install, it is here at http://www.rapportsoftware.co.uk
John
Re: Card Payment facility incl terminal
Call John Morris on 07557 741385 and he will sort it for you.
John
Re: *** Feb Whitegoods Conference ***
Spot on Jim, I found the email between some Cialis offers that I missed in the spam folder 😆
John
Re: *** Feb Whitegoods Conference ***
kwatt wrote:No worries Bob, it seems a few early registrations went AWOL for some reason I can’t figure out. 😕
Sorted now though and you should get a ticket in the morning.
K.
Hi K,
I registered again yesterday and have not got the confirmation email yet, is there still a problem?
John
Re: Fisher & Paykel Dishwasher DD603H And others
the top drawer dead one will probably be a heater plate, when you look at the heater you will either see part of it blown or the thermal in line fuse will be bent and shorting against the tracks.
The one with the drawer that doesn’t close will be a link arm problem, if it has the white plastic rod running parallel to the harness make sure it is not broken, if it has the new style metal arm then it has probably been fitted wrong, to confirm check the harness and hoses on the other drawer and make sure the top harness/hoses are fitted and twist the same way, if not disconnect the harness, fill hose and waste hose from the tub, take of the three clips that hold the harness together and then rebuild as per the other drawer.
on the noisy one it will be either a foreign object hitting the rotor motor or the rotor motor will be knackered, check the blades on the bottom of the rotor motor for damage at the edges, if damaged it will be off balance and will be noisy.
When you take a drawer out from one of these you have to turn it upside down to access the heater,if you turn it clockwise to work on it make sure that you turn anticlockwise when reassembling or the hoses will kink and the drawer will not close.
HTH
John
