johnmac11

Forum Replies Created

Viewing 15 posts - 406 through 420 (of 1,760 total)
  • Author
    Posts
  • in reply to: Stoves DF600M grill element #366995
    johnmac11
    Participant

    Re: Stoves DF600M grill element

    Hi Jim,

    According to the stoves website it is part number 081583305, there is a picture of it in the shop.


    John

    johnmac11
    Participant

    Re: Help Please # Fisher Paykel DD603H – Not draining correc

    As I said above, check the heater resistance values. The heater has two circuits so one can fail and the water will still get warm.
    I very much doubt it will be a controller problem.

    John

    johnmac11
    Participant

    Re: Help Please # Fisher Paykel DD603H – Not draining correc

    Pretty confident but you can’t be sure without checking the resistance values of the heater.

    If you take out the basket and then the round stainless plate inside the dishwasher you will see the top of the heater plate, it is the enamelled plate between the plastic tub and the rotor motor in the middle. It comes out from the underside of the tub but if you are going to try to remove it make a careful note of how you get it out as it can be tricky to get back in once dismantled. It would be nearly impossible to describe how to remove without seeing it done but if you attack it from the bottom you will get there, once you have done it you will understand why it is hard to describe how to do the job 😆

    John

    johnmac11
    Participant

    Re: Help Please # Fisher Paykel DD603H – Not draining correc

    F4 is a faulty heater plate, not the easiest of jobs to do if you have not seen it done before.

    John

    in reply to: diplomat cooling fan #366741
    johnmac11
    Participant

    Re: diplomat cooling fan

    Hi Don, :waving:

    in reply to: diplomat cooling fan #366740
    johnmac11
    Participant

    Re: diplomat cooling fan

    Part number is OCLFA


    John

    johnmac11
    Participant

    Re: Fisher&Paykel Dishdrawer DD603 stops mid cycle no error

    Sounds like a faulty heater plate which is probably not a DIY option.

    Click on the dishwasher repair link below to find a local engineer to repair this.

    John

    in reply to: model no please #366243
    johnmac11
    Participant

    Re: model no please

    It is model AWM1203

    John

    in reply to: LAMONA hob HJA1613 #365801
    johnmac11
    Participant

    Re: LAMONA hob HJA1613

    Send me a PM with your email address and I will send the wiring diagram.

    John

    in reply to: Another joke. #137562
    johnmac11
    Participant

    Re: Another joke.

    I would like to share an experience with you all, about drinking and driving.
    As you well know, some of us have been known to have had brushes with the authorities on our way home from the odd social session over the years.
    A couple of nights ago, I was out for a few drinks with some friends and had a few too many beers and Knowing full well I may have been slightly over the limit, I did something I’ve never done before – I took a bus home.


    I arrived home safely and without incident, which was a real surprise, as I have never driven a bus before and am not sure where I got it from!

    in reply to: Another joke. #137561
    johnmac11
    Participant

    Re: Another joke.

    The lady next door confronted me today about items missing from her washing line.

    I nearly sh*t her pants.

    in reply to: Stoves cooker 059056600 #365725
    johnmac11
    Participant

    Re: Stoves cooker 059056600

    It might be one of the models that Stoves supply a stat kit for, these kits come with both stats, both switches,assorted wiring and a set of knobs. Would be worth checking with Stoves to see if the kit fits.

    John

    in reply to: Stoves cooker 059056600 #365723
    johnmac11
    Participant

    Re: Stoves cooker 059056600

    on the GDHA website it lists 082558001 as the part number for the stat and it says that the part is in stock, take a look and see if it is the same one as in the picture.

    John

    in reply to: AEG induction hob glass top #365789
    johnmac11
    Participant

    Re: AEG induction hob glass top

    Please don’t shoot the messenger 😀 retails at £358.07

    John

    in reply to: user manual for PROLINE IH680P-U induction hob #365773
    johnmac11
    Participant

    Re: user manual for PROLINE IH680P-U induction hob

    Have you tried emailing Comet, read the posts in the link and it might help.

    John

    http://answers.comet.co.uk/answers/0331 … stions.htm

Viewing 15 posts - 406 through 420 (of 1,760 total)