Forum Replies Created
-
Posts
-
Re: Hotpoint WD420 not moving through programme
Iadom if there a faulty heater you dont get error lights it will sit washing for evermore waiting to hit the desired temperature, cheers JJ
Re: WMA 63 ULTAMA
More than likely brushes but check for a dry joint on the chopper board take a soldering iron whith you.
Re: Hpt WMA63P
Early machines had them, later machines had them removed, you must be a later one if they aren’t there.
Re: Hotpoint WF430P
Have you checked the fill valves, it sounds more like an open circuit solenoid, these machines pre fill on one valve to prime the sump then sw over to continue filling, it will sit for ever if o/circuit. ps Its the option lights that determine what error code is shown.
Re: British Gas Homecare
I dont brand all BG engineers as crap as i know a good few, but the one that does this area should aint doing what he is paid for, i make mistakes we all do, but i’m talking health and safety here. There are engineers i encouraged to go to B G because they were getting shafted by our lot, incidentlly i had a start date also had my uniform request, but thought better of it. I am mad i know?. THere are engineers who dont give a toss who work for Hotpoint ( sorry i still class myself as a Hotpoint engineer) and B G and every other company. Incidently KPI stands for TLR in Indesit speak.
Re: British Gas Homecare
Crap if British Gas cannot get an engineer out they pass the call onto us, which we have to respond within 2 days or we dont get paid, what happens then is they overbook us trying it on if we kick up a fuss, they dont move the Gas Board calls, they move our own customers even though the Gas Board calls were the last calls booked, every Gas Board call i go to the customers are going nuts when i explain i dont work for them they soon calm down, it,s when they kick off about waiting it gets passed to us. The call to-day the wiring was like a dogs dinner the belt was getting thrown off every other week our friendly gas board engineer just refitted and warned her about loading, nothing to do with the play on the drum.
Re: British Gas Homecare
When i ordered container she was telling me Gas Board were out almost every week, it was at leat 3 years since i was last at the machine, but what a mess, i spent about an hour getting the thing safe enough to use, but the bearing housing was knackered seeping between the housing and tub hence requiring a container. Its great to know our own customers are taking a back seat for the good old Gas Board.
Re: British Gas Homecare
I’ve an outer container to fit to an old 9926 w/dryer on a British Gas contract , i was glad to see the back of her when she told me she was taking the Gas board cover, because the gas board are over run i’ve got her back again.
Re: Hotpoint Ultima FDW85 AL05 Error
When you tip it on that side any water in the sump will run up the pressure system getting trapped causing an airlock which in turn causes an AL05 fault, cleaning pressure system may cure but might need a pressure switch.
Re: Hotpoint Ultima FDW85 AL05 Error
Sounds like you have got an airlock, never lay them down on that side causes no end of problems.
Re: Hotpoint Ultima FDW85 AL05 Error
Was the hose internal and how did you get access, did you tip onto the right and side.
