Forum Replies Created
-
Posts
-
Re: hotpoint engineers cannot solder
cab wrote:Her Majesty’s what!
I served my time as an electrical fitter working all aspects of electrical and electronic engineering, at HM Dockyard Rosyth be it in a workshop, warship or the the utilities req’ to supply the base and i can solder very well as it was a neccessity of my apprenticeship. I do not like to bellittle anybody and will help when i can but these type of comments, makes me wonder why i registered for this site at all.
Re: Creda T602CW Dryer
If you remove earthing brush from band it should come out of dry as this would indicate a high resistance, if so check the band is insulated from the drum, if it doesnt i would go for module i hope this helps you cheersjj.
Re: hotpoint engineers cannot solder
Yup not allowed to solder, but i always carry my iron with me dont let the bosses know, always remove it if he is about, i served my time as a spark at one of Her Majesty’s Dockyards, wouldnt be without my iron.
Re: Hotpoint wf220
Check any of the option buttons if 2 or more are jammed on it locks out and you cannot programe.
Re: Ariston/Hotpoint module wiring
Is it a black wire with a spade it goes on the earth to the motor only other back wires are in rast plugs, i’ve never understood why they used black for this cheers jj.
Re: Ariston MBA3842C fridge-freezer no error on malfunction
I would suspect similar to uk version thermistor fauty, there is a module to overcome this as the thermistor is non replacable.
Re: WMA 54
We always fit the 35 mm to everything i’ll check, tomorrow if 30 mm is available when emit wakes up.cheers jj
Re: WMA 54
1200 and below have been fitted whith 30mm shafts, above 1200 are 35mm shafts, hope this hepls. jj
Re: Hotpoint – Wma 31n
Bryan wrote:Now who`ll be to blame for that johnny , the Bosch motor or the Merloni electronics :?:……..mmmm I wonder :rolls:.
BryanWMA’S dont use Merloni electronics they are made by AKO who i believe are a subsidary of Bosch.
Re: Hotpoint – Wma 31n
The Bosch motor when brushes wear down take out the board about 70{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time
Re: Proline TDC7A condenser drier bearing conversion
1703080 is for the vented dryers the kit for condensor dryers is 1703273 comes whith belt and bearings, cheers jj.
Re: Hotpoint FDW60 Dishwasher
The pump is wired in series with the wash motor, when it fills does it wash if not i would think the wash motor is goosed. jj
Re: D&G and Whirlpool
D & G started that practice on with Hotpoint about 4 years ago, most of the Chargeable work is converted to a D & G Repair + Maintenace hence the £149 over 10 months, after the year they revert back to normal rates, many a time i’ve been closing a call down and the phone rings and yeh! presto they get a contract, They sign up some old scrappers that you would,ve told the customer to save her cash and get a new one, if parts are available you have to fix.
