Forum Replies Created
-
AuthorPosts
-
johnsdad
ParticipantRe: Whirlpool washing machine AWO3751/5
Thanks John
johnsdad
ParticipantRe: Cpa1 gas
I am currently renewing my ccn1 and ckr1, I took it before 1 April as thereafter it will be compulsory for ccn1, like it or not
johnsdad
ParticipantRe: Meneghini
Looks suspiciously like a liebherr in a wardrobe, that makes it a very expensive wardrobe. The customer will be mighty pi$$ed off when it loses its gas, which is flavour of the month with liebherr at the moment.
johnsdad
ParticipantRe: Samsung WF8702RSS/XEU
DC90-10128K
johnsdad
ParticipantRe: Samsung WF8702RSS/XEU
duct assy fan housing sensor defective
johnsdad
ParticipantRe: AMANA AC2224GEKB
Enter code 05, it should be fine
johnsdad
ParticipantRe: Samsung RSH1DTMH American Style Defrost Heater
Its physical size has increased
johnsdad
ParticipantRe: Samsung door reversal
unscrew the hinge pin from the hinges and screw them in the other side or the hole
November 20, 2011 at 6:13 pm in reply to: F*{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}kin Amana AC2228HEKB #363991johnsdad
ParticipantRe: F*{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}kin Amana AC2228HEKB
Its not a whirlpool, sounds like usual damper fault, plenty on here about it
johnsdad
ParticipantRe: What’s the most stupid things customers say?
Samsung side by side:
“The child lock is not working any more, the door can still be opened. It used to lock the door.”
“No thats not what it’s for”
“Yes it is it definately used to lock”johnsdad
ParticipantRe: Amana SRD522VE american fridge freezer
R0170055
johnsdad
ParticipantRe: Maytag/admiral GC2224GEKB American fridge freezer
Most likely to be damper frozen and stuck open, sometimes the return spring drops out. Sensor problems are very rare
October 19, 2011 at 7:32 pm in reply to: Smeg WD16 Washer Dryer basically dead (interlock locks) #361599johnsdad
ParticipantRe: Smeg WD16 Washer Dryer basically dead (interlock locks)
Check the brushes, if they’re worn it won’t start a prog
johnsdad
ParticipantRe: Smeg Hood KSEIV950X
The main pcb is under the bottom section of the chimney. If the installation allows you can slide it up for access, otherwise it has to be taken down – serious hassle
johnsdad
ParticipantRe: bekodrcs68s
No, its 2960550103
-
AuthorPosts
