Kenny

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 68 total)
  • Author
    Posts
  • in reply to: 16th Edition #148101
    Kenny
    Participant

    Re: 16th Edition

    Phidom
    The allowed voltage variation in the UK is +- 6 percent (240 volts is the root mean square value (avarage))

    You are correct that supply authority has to maintain the 50Hz frequency but this is to do with supply and tranmission concerns rather than the end user.

    The voltage is of concern to us becouse of the power that a unit will use is constant. Power is calculated from Volts x Amps = Watts

    So if you decrease the voltage the machine will draw a higher current. to run at the required power rating. and vice verca

    in reply to: Tales From The Front Lines #147478
    Kenny
    Participant

    Re: Tales From The Front Lines

    I went to a servce machine that was not dumping water.

    Young woman just moved house and ashured me the maching had been working fine before she had moved (Clue 1)

    Did the usual. Dained the drum, took out some junk from sump filter. Run machine water still not dumping.
    Drained the drum again removed sump punp tested ok bench tested ok checked drain hoses for blockages. No blockage found refitted again test ran.
    Still not dumping water. 90 minuits still no further foward, cut my hand on edge of machine, a baby trying to pick up my tools and a dog trying to get me to pet it.
    Finaly disconected the drain hose (again) from the U bend but this time had my head under the sink when I spotted that where the drain fitts onto the U bend was still sealed 😳 😳 😳 cut this open reconected the drain hose and away she went

    If only I had thought about what she had told me !!!!!!!

    in reply to: Whats the most annoying thing customers do? #107340
    Kenny
    Participant

    Re: Whats the most annoying thing customers do?

    How do you deal with this one then

    MY own wife

    Wife.. The freezer is not working dear
    Me.. why what is happening
    Wife.. Stuff at the front is not frozen
    quick inspetion later
    Me.. Dear do not pack the freezer soild with food. The fan needs to blow cold air all round the food to keep it frozen.
    Wife.. Humm now you are just blowing hot air and dont want to fix it…..
    Me ???????

    two days later

    9.30pm
    Wife.. The washingmachine is playing up
    Me… We have had it about 5 years now it will be the brushes I will get some in the morning
    Wife.. Hummmmm you just dont want to fix it just like the freezer

    in reply to: Not frost free candy #141837
    Kenny
    Participant

    Re: Not frost free candy

    I dont think its the gas.

    Single compressor, Refigerator compartment going down to temp, and evaporator icing up.

    in reply to: Not frost free candy #141835
    Kenny
    Participant

    Re: Not frost free candy

    Thanks Dave

    will check that out and let you know how I get on.

    in reply to: Not frost free candy #141833
    Kenny
    Participant

    Re: Not frost free candy

    Dave

    I managed to get a pict of the plate.. This help id the unit?

    Im not to hot on fridge freezers 😳

    in reply to: Recommended Listening #136011
    Kenny
    Participant

    Re: Recommended Listening

    My music tastes depend upon my mood at the time

    Shocked the kids lately by getting into “Fat Boy Slim”

    in reply to: Now I Know… #135150
    Kenny
    Participant

    Re: Now I Know…

    kwatt wrote:60 odd miles there and back… over FOUR hours!

    I live near Stirling about 30 miles away and I always take the train. Parking is murder allso

    As for roads keep clear of M8 Kingston Bridge, Glasgow, Road works on-going

    in reply to: LG WTR1071TP #133760
    Kenny
    Participant

    Re: LG WTR1071TP

    sounds like to much water in the drum to me.

    checked the water pressure switch?

    in reply to: Speed control #134317
    Kenny
    Participant

    Re: Speed control

    dbm wrote:make sense?

    spot on thanks.

    I was thinking about brush motors but I have had a couple of induction motors.

    So what about the LG direct drive motors where its is a pernament magnet motor?
    Are these controled in the same mannor as induction motors then?

    in reply to: LG codes ? #133894
    Kenny
    Participant

    Re: LG codes ?

    Cheers dave thanks
    thanks r600 a monday job now

    in reply to: Currys couldn’t install? #129134
    Kenny
    Participant

    Re: Currys couldn’t install?

    I asked to go to one that they would not install becouse it need conected into a spur unit.
    It was a new build house with isolation switches above the worktops.

    in reply to: Creda Hallmark #128180
    Kenny
    Participant

    Re: Creda Hallmark

    Sorry Martin

    This a machine that has been dragged out the back store.
    Thought it would be a good project for the boys to build, the rear cover is missing so I asume the modle Number is on that. I wil try to take pictures of it and post them on the web.

    Hopfully someone will reconise it 😥

    in reply to: Penguin45 – Conspiracy Theory – I Confess #127102
    Kenny
    Participant

    Re: Penguin45 – Conspiracy Theory – I Confess

    Daa da daaa di di domm

    If you have a problem and you know where to find them YOU can hire the A Team

    But as there are too meny penguins then hire these guys instead
    http://www.orcasafari.co.uk/orca_photos.asp

    They just might do it for peguin feed

    in reply to: The reason you can’t give technical information out! #103763
    Kenny
    Participant

    Re: The reason you can’t give technical information out!

    When I took over my current post there was no testing for colour blindness at all.
    I am now instigating testing.

    I have support from management when I explained the potential pit falls and liability of not doing it. 😯 We all have a resonsablity for the health and safety of ourselves and others and I personally would not like to work with some one who was colour blind.
    “Pass me the green wire. No I said the greeeeeeeen” :eeek:

Viewing 15 posts - 46 through 60 (of 68 total)