kwatt

Forum Replies Created

Viewing 15 posts - 3,106 through 3,120 (of 25,830 total)
  • Author
    Posts
  • in reply to: AEG Lavamat Turbo pressure switch? #439295
    kwatt
    Keymaster

    Re: AEG Lavamat Turbo pressure switch?

    Do you have the Product or PNC number please?

    K.

    in reply to: HOTPOINT AQUARIUS spare parts #439353
    kwatt
    Keymaster

    Re: HOTPOINT AQUARIUS spare parts

    35mm kit you need then, this one:

    https://shop.ukwhitegoods.co.uk/quaunt2 … rum-spider

    K.

    in reply to: HOTPOINT AQUARIUS spare parts #439351
    kwatt
    Keymaster

    Re: HOTPOINT AQUARIUS spare parts

    That one can have either the 30 or 35mm bearing kit in it and they swapped them about, at times seemingly at random. 😕

    If you can measure the diameter of the rear bearing we should be able to confirm the correct bits with that for you.

    K.

    in reply to: Broken Hob Glass – Cracked Whilst Cooking?? #439325
    kwatt
    Keymaster

    Re: Broken Hob Glass – Cracked Whilst Cooking??

    It is physical damage, point of impact on the side.

    If it had done as they claim it wouldn’t show the spidering there and would be a clean break so, they could be telling porkies. 😉

    K.

    in reply to: WTA Contract Work Offer #439289
    kwatt
    Keymaster

    Re: WTA Contract Work Offer

    WTA website has technical issues that are being resolved, means moving hosts and stuff, not simple or fast.

    I have no idea on subs, you’d have to email on subscriptions@whitegoodstradeassociation.org to find out but, if access is removed the chances are it’s unpaid.

    And if it was, there would have been multiple reminders sent before that happened.

    K.

    in reply to: How to remove ceramic top on Zanussi ZCE 7700X #439107
    kwatt
    Keymaster

    Re: How to remove ceramic top on Zanussi ZCE 7700X

    Honestly from my own perspective, without standing in front of it and working it all out I really couldn’t say with any degree of certainty.

    K.

    in reply to: How to remove ceramic top on Zanussi ZCE 7700X #439104
    kwatt
    Keymaster

    Re: How to remove ceramic top on Zanussi ZCE 7700X

    All too possible.

    All you do is go terminal number for terminal number unless there’s info saying otherwise.

    There’s slews of these that have ben changed over the years with the common conversions for them here:

    https://help.ukwhitegoods.co.uk/support … regulators

    https://help.ukwhitegoods.co.uk/support … sion-chart

    The original one fitted to your cooker, as I said, is actually obsolete now and replaced by that one.

    K.

    in reply to: How to remove ceramic top on Zanussi ZCE 7700X #439102
    kwatt
    Keymaster

    Re: How to remove ceramic top on Zanussi ZCE 7700X

    I did say that they can be physically different yet still be perfectly correct. Images and looks on spares often isn’t the be all and end all as they do change over time. 😉

    I would very much doubt the ring being faulty, the chances of that are astronomically low.

    K.

    in reply to: Smeg DI612CA failing to spray #439149
    kwatt
    Keymaster

    Re: Smeg DI612CA failing to spray

    The record pump is the main wash motor, there’s also the drain pump.

    Not really any instructions as such, it’s really just a case of stripping out the underneath to get to them but, releasing the hoses should allow you to see or feel anything major in there causing issue.

    K.

    in reply to: Smeg DI612CA failing to spray #439147
    kwatt
    Keymaster

    Re: Smeg DI612CA failing to spray

    Have you checked the record pump impeller housing?

    K.

    in reply to: Bosch kgee40a #439244
    kwatt
    Keymaster

    Re: Bosch kgee40a

    How was it transported and did you let it stand before you turned it on?

    K.

    in reply to: How to Reset Beko ASL141S Fridge Freezer Display #438507
    kwatt
    Keymaster

    Re: How to Reset Beko ASL141S Fridge Freezer Display

    Thanks for the update Mohamed, I actually really do appreciate it as will many of the guys, this kind of info is gold.

    And yet again it demonstrates not to jump to the conclusion that boards are faulty. We stress this to people all the time, check all connections!

    K.

    kwatt
    Keymaster

    Re: Freezer part of FridgeFreezer isn’t freezing items!!!

    Sadly there’s not a lot of info on that machine I can locate. So, I, Bob or anyone will probably need a little help here…

    Could anyone with access to Partfinder or whatever WP/HP et all are using get me a blowout of this so I can see what the layout is please? A part list would be good also if poss.

    Ta

    K.

    in reply to: Dishwasher Identification Needed #439172
    kwatt
    Keymaster

    Re: Dishwasher Identification Needed

    Probably. Usually there’s something on them around the door or on the back.

    K.

    in reply to: Dishwasher Identification Needed #439170
    kwatt
    Keymaster

    Re: Dishwasher Identification Needed

    That looks like a commercial dishwasher. If it is, it could be anything. 😕

    K.

Viewing 15 posts - 3,106 through 3,120 (of 25,830 total)