Forum Replies Created
-
Posts
-
I don’t know the machine but, is the water pressure high as if memory serves me some just use a timed fill so, water pressure too high = too much water = leak.
K.
Pyro single oven so all electronic.
Any number of things, depending on how well they’ve isolated the electonics, can send them mental. An earth fault, boards, sensor… the list goes on.
Even external factors such as, is the supply good, is it clean could affect what it does with your issue being that, if it comes back up and works okay it could be a nightmare to try to pinpoint what’s causing the issue.
The simple answer is, replace the boards but if it’s not that or those causing it, replacing them will do no good.
K.
I’d not worry about it personally as there is little they can do about it as you work from home, like tens and tens of thousands of people.
K.
We’d have been ordering it from Italy as part of a larger order, UK suppliers were always scarce.
K.
Once I get things for UKW sorted it should be orderable but I’m at least a couple of weeks away from that. 🙁
K.
Safety thermostat is:
The cooling fan one is this one:
https://shop.ukwhitegoods.co.uk/a49230-britannia-oven-thermostat
But I can’t find stock of it but, it sure ain’t obsolete.
K.
E7 is a heating fault, the service info only tells you this:
Heating error. In case of heater fault the machine continues with program.
But basically, the machine is detecting an error on the heating circuit, somewhere.
K.
I don’t have a diagram for it 🙁
But it is a pretty “dumb” cooker so it will energise circuit for the cooling fan to turn on though it might not kick in until the initiation stat reaches temperature, then the fan will run.
K.
Wiring diagrams for these are a nightmare, if possible, to get but if you can get me the ART number I will see what I have.
But most run from the main switch and they are a known point of failure.
K.
You may struggle with that as induction hobs need a lot of ventilation and active cooling for the electronics so, an oven under one heating up to clean is likely not to be a winning combination for longevity.
K.
A dodgy cooling fan or oven stat would be the obvious thing to look at, assuming ventilation is okay. There’s little else I can think on it being.
K.
You’d not be able to get into the heater like that and that’s where any blockage is liable to be.
K.
