kwatt

Forum Replies Created

Viewing 15 posts - 3,286 through 3,300 (of 25,830 total)
  • Author
    Posts
  • in reply to: EOD67642X bottom oven comes on when top oven selected #437756
    kwatt
    Keymaster

    Re: EOD67642X bottom oven comes on when top oven selected

    Sounds like a selector switch problem.

    Is that an Electrolux model and, if so, what’s the PNC code from the rating plate?

    K.

    in reply to: Cooker hood extraction unit EFC650X #437755
    kwatt
    Keymaster

    Re: Cooker hood extraction unit EFC650X

    Watch as there’s a number of versions of that hood and, by the looks of it, three different switchbanks used in it.

    Do you have the PNC number and I’ll try to narrow it down for you?

    K.

    in reply to: Recommend a heat pump dryer #437750
    kwatt
    Keymaster

    Re: Recommend a heat pump dryer

    My advice Paul, unless you do a lot of drying and, I mean a lot, they’re not worth it…

    http://www.ukwhitegoods.co.uk/help/buyi … s-worth-it

    K.

    in reply to: AEG Santo fridge freezer s 75408 kg8 fridge warm #437645
    kwatt
    Keymaster

    Re: AEG Santo fridge freezer s 75408 kg8 fridge warm

    I’d think it was wiring, sensor or fan motor but obviously that’s “best guess”.

    K.

    in reply to: AEG Santo fridge freezer s 75408 kg8 fridge warm #437642
    kwatt
    Keymaster

    Re: AEG Santo fridge freezer s 75408 kg8 fridge warm

    Yup, old towels at the front of the door would be a good plan. 😉

    K.

    in reply to: AEG Santo fridge freezer s 75408 kg8 fridge warm #437640
    kwatt
    Keymaster

    Re: AEG Santo fridge freezer s 75408 kg8 fridge warm

    Yes, that’d be a start and clear any ice build up.

    Beyond that you’re into checking wiring, resistances and all manners of stuff to track down the problem.

    K.

    in reply to: AEG Santo fridge freezer s 75408 kg8 fridge warm #437638
    kwatt
    Keymaster

    Re: AEG Santo fridge freezer s 75408 kg8 fridge warm

    Yes, exactly that.

    Frost free air driven fridge freezer by the look of it.

    I’d suspect a sensor but it looks as if they’re foamed in, possibly non-replaceable but a pain to swap at any rate.

    However there are several notes on the fan motor in the freezer being iffy causing irregular temperatures so I’d start there. First thing to do is see if there’s any blockage or ice build up in there.

    There are a bunch of things to be doing but a lot of it is a bit technical.

    K.

    in reply to: AEG Santo fridge freezer s 75408 kg8 fridge warm #437636
    kwatt
    Keymaster

    Re: AEG Santo fridge freezer s 75408 kg8 fridge warm

    Do you have the PNC number from the rating plate on it as there will be multiple versions of it.

    K.

    in reply to: Payments – First4Service #430074
    kwatt
    Keymaster

    Re: Payments – First4Service

    Like a lot of people usually are. 😉

    K.

    in reply to: Will A Universal Oven Thermostat Work For Every Oven? #437623
    kwatt
    Keymaster

    Re: Will A Universal Oven Thermostat Work For Every Oven?

    Theoretically, this one should be the best “fit” given the range on the old one but, as with a lot of such things it may not be exactly the same. As in, you may need to adjust slightly how it’s used as well in terms of the temperature.

    https://shop.ukwhitegoods.co.uk/14ts32- … thermostat

    To be honest though, it’s probably going to be fine in it, I just can’t tell you that 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} for sure.

    K.

    in reply to: Will A Universal Oven Thermostat Work For Every Oven? #437621
    kwatt
    Keymaster

    Re: Will A Universal Oven Thermostat Work For Every Oven?

    That one, if it’s the main oven should be this one:

    https://shop.ukwhitegoods.co.uk/0825580 … thermostat

    It’s got a 320?C max setting which is high and a bit unusual. You could, in theory use a universal one but, the temperature would be out a bit on the control knob.

    The universal ones are better suited to “continental” style ovens.

    K.

    in reply to: Beko DWD 8657S possible error. #437577
    kwatt
    Keymaster

    Re: Beko DWD 8657S possible error.

    It’s water hardness level adjustment you’ve gotten into.

    All you should have to do to get back out that is:

    “After selecting the required level of softening, save the selected level to the memory by pressing the “Start/Stop Button”. The start/stop indicator now lights up permanently. Exit the level-adjusting mode by shutting down the machine.”

    K.

    in reply to: Hotpoint Aquarius Washer Dryer WDF760P #437532
    kwatt
    Keymaster

    Re: Hotpoint Aquarius Washer Dryer WDF760P

    Probably one of the boards then.

    K.

    in reply to: Hotpoint Aquarius Washer Dryer WDF760P #437530
    kwatt
    Keymaster

    Re: Hotpoint Aquarius Washer Dryer WDF760P

    If you count the flashes, there should be a sequence, then a pause, it’s probably a fault code.

    K.

    in reply to: ZIV413 Dishwasher #437459
    kwatt
    Keymaster

    Re: ZIV413 Dishwasher

    It’s on the Amica portal.

    K.

Viewing 15 posts - 3,286 through 3,300 (of 25,830 total)