Forum Replies Created
-
Posts
-
K7088A is a partial model number but it would appear as if those are obsolete from a quick check.
K.
In my experience, so far as I can tell, it’s all low end rebadged stuff (largely Chinese in origin) and spares support for them down the road is non-existent so my advice would be to give them a wide berth.
K.
The only way you’re going to get to find the cause is by opening up the back. It could be freezing and melting on defrost, or it could be the filter etc. There is no way to be sure without looking.
K.
If you’re interested, there’s a whole article on the topic here:
https://www.ukwhitegoods.co.uk/help/buying-advice/all-appliances/2910-appliance-sound-levels
K.
I can’t find any info on that model anywhere, but knowing the brand, at that age, it’s almost certain to be obsolete, meaning a new oven will be your only option.
K.
For cooker hoods, Elica.
Personally, I’d not use much else unless there was no other option, as they’re good, work properly, and actually extract stuff and you can get parts and support for them.
K.
I’d not bank on the internal parts being the same, the change all the time. There’s no way to be sure that will be the case.
K.
No, so far as I know they don’t make any hoods at all, they’re all bought in and badged.
They only sold that as a complete motor unit and you’ll find that, if they don’t split it down, then that’s the way that whoever built it for them does it and they’ll all be the same. And, as it’s a complete unit there will be no information on any part of it at all, you see the complete unit and that’s it, nothing else.
I don’t know who made that hood for them but a number of parts are obsolete so I wouldn’t advise spending that sort of money on it, it’s not worth it.
K.
Deep joy, nobody has any info on them either but Lamona had hoods made by the same Chinese makers and they generally all used this one:
https://shop.ukwhitegoods.co.uk/20110950-cooker-hood-capaitor
K.
