[Latham63]

Re: Electrolux ESL5201L0 Dishwasher no heat

Mod no. Edited!
PNC 91153913902

[Latham63]

Re: Miele G1173i dishwasher 6 flashing lights error

The heater element checks ok.I don`t suspect a heating fault as it mainly just drains & doesn`t even start to fill?
Does 6 flashing lights mean there is a fault that could be anything?
Tried a new non return valve,still no joy.

[Latham63]

Re: Miele G4100 Dishwasher

Thanks. Replaced pressure switch,all good.

[Latham63]

Re: Bosch SMV50COOGB/06 Dishwasher. No operation

The fault was the door not shutting properly!
The front door panel was hitting the unit,just slightly,preventing the sensor from activating!

[Latham63]

Re: Bosch SMV50COOGB/06 Dishwasher. No operation

Sounds as if the pump momentarily tries to spark up,then gives up.
I`ll try a new pump,thanks Dave

[Latham63]

Re: Neff S41E50S0GB/28 E24 fault code

Thanks. After reading other reports on the subject it would appear the heat pump is the main culprit. It also seems common for the plastic base to leak where it joins the metal case of the dishwasher causing earth leaks.Am now recommending customers buy the all stainless case dw to avoid premature write offs.

[Latham63]

Re: Neff S41E50S0GB/28 E24 fault code

Thanks Martin
I’ve tried entering E24 in the search box,just seems to bring me back to my post?

[Latham63]

Re: miele w3830 washing machine-fill light flashing

The check inlet normaly means not filling in time or at all.
Being as water comes in on the wash cycle ok,& I can`t manually select rinse on this machine,can only assume there may be a blockage in the soap box device which changes the flow when the rinse cycle is reached?

[Latham63]

Re: Candy CDI1012/4-80 Dishwasher Fault code

Hi Martin. Just seems to be continuous flashing.No pause!

[Latham63]

Re: Siemens WMI6S794GB Error code

Not on this machine!
There`s an option arrow,up & down touch buttons.
I`ve tried every button option…no joy!

[Latham63]

Re: Miele W3164 Edition111 Error code E50

E50 = no drum rotation,found from Miele!

[Latham63]

Re: AEG T65270AC dryer Error code

PNC is 91609675200

[Latham63]

Re: AEG T65270AC dryer Error code

Other suggestions of E60 are fan malfunction.
Fan seems to be blowing fine.
Can only think it’s a board fault as the blocked condenser has been cleaned & new heater unit fitted?

[Latham63]

Re: AEG T65270AC dryer Error code

Have run a diagnostic and E63 appears?
Works ok on a delicate cycle,but E60 appears on cotton cycle.
The new heater is fine,working ok.
E63 says check heater,wiring & pcb.
The drum does get extremely hot.
Apart from the thermal fuse on the heater is there a thermostat fitted anywhere else?

[Latham63]

Re: AEG T65270AC dryer Error code

Ok.Ended up fitting a new heater assembly.Everything appeared to be fine,heating nicely.
Later today received a message-E60 has appeared again!
Could the thermal fuse blowing have affected something else or does the E60 code have to cleared 1st?

[Author]

Posts