[laurenceuk]

Re: Zanussi FLE1215W Wash M/c – Neon Light Error Codes?

Thanks for taking the time to respond Flyman – very helpful.

Laurence

[laurenceuk]

Re: Zanussi FLE1215W Wash M/c – Neon Light Error Codes?

Thanks Steve

[laurenceuk]

Re: Lux Fridge ERU 1472 Door Hinges – Pt No Please

Thanks Bob,

Wow they`re expensive (Connect).

It seems Connect only carry the lower hinge. Is it worth just replacing the
lower one on its own.

Thanks again

Laurence

[laurenceuk]

Re: Creda Cooker 48317 Electronic Timer Obsolete – I Need On

OK, thanks Chris.

I`ll give them a ring

Laurence

[laurenceuk]

Re: LG WM16220FD Wash M/c No Motor Action?

Thanks Martin

Lucky Goldstar

[laurenceuk]

Re: Candy D/W CDI1012-80 Fill Problem

Thanks Dave

[laurenceuk]

Re: Candy D/W CDI1012-80 Fill Problem

Thanks Peng,

I was about to ask how I identify the date code but both those numbers go to the same Connect part number – would this be expected or are they wrong.

Laurence

[laurenceuk]

Re: Spare Needed For Frigidaire MTRF280?

Thanks folks,

I will give the VT9 a go first.

Laurence

[laurenceuk]

Re: This May Be A Long Shot But Search Your Shelves

Re prices.

They are, but if the customer wants it they will pay.

Laurence

[laurenceuk]

Re: Bosch D/W SGS45E08GB/45 What`s This?

Thanks Martin,

Whilst I did not check the heater for a circuit as I had allowed the machine to
go on for about 20 mins after the dispenser had opened (assuming heater
would come on after this happening) but no live was detected at the heater
terminals. I therefore discounted the heater as a problem – besides I thought
heaters either worked or they didn`t (I have had very rare occasions with
washing m/cs when heaters are corroding out and have created a return –
but I never say never.)

The water level is fine so I am drawn to the control pcb – what a shame.

Thanks for your input again, Martin.

Laurence

[laurenceuk]

Re: This May Be A Long Shot But Search Your Shelves

Thanks Don,

Was able to get the last one from BEC Components mentioned in that thread.

Laurence

[laurenceuk]

Re: LG WM16220FD Wash M/c No Motor Action?

Thanks Lerch.

Just to clarify please – is this the correct way to read the LE description.

Lock error. Check lead – 3 pin to stator (PCB lead). Repair or replace Hall
sensor in stator. If faulty replace stator.

Not knowledgeable on these machines – what is a Hall sensor?

Thanks

Laurence

[laurenceuk]

Re: Where Can I Get Atag Cooker Hob Spares?

Thanks Spanner

[laurenceuk]

Re: Miele Wash M/c W842 Fault Code Flashing `Rinses`

Thanks for the feedback folks, it`s much appreciated.

Hi Baron,
How`s things?
This one has module behind facia panel.

Hi Clayside,
Thanks for the reassurance and that`s the part number Miele gave
(£130+pp+vat).

Laurence

[laurenceuk]

Re: Miele Wash M/c W842 Fault Code Flashing `Rinses`

Hi Seamy,

Thanks for your response.

I have removed the brush and tacho housing from the front of the motor
and checked brushes and tacho cct – all ok.

The field windings have a cct as does the armature and the cut out is good.

It seems the motor is good.

Laurence

[Author]

Posts