[laurenceuk]

Re: Diplomat ADP8332 ( Whirlpool Clone)

Perfect John, thanks.

Fault number 4 is my problem.

Laurence

[laurenceuk]

Re: Diplomat ADP8332 ( Whirlpool Clone)

I was just about to post a query about the askol spray pump when I noticed
this posting.

The Diplomat model number is ADP8322 (W/Pl 854500015810).

I did a general search under the model number in Connect and this motor
came up 5031680945362. Is this the correct one – it is different than the
askol and I am hoping that this is a replacement.

If not could you give me the part number I need.

Sorry to but in on your thread, goose.

Thanks

Laurence

[laurenceuk]

Re: Brandt Hob Problems – Is this Induction?

Thanks folks,

Great posts.

Went today and it does appear to be the terminal block – all melted and the
links badly burnt.

My next question is were do I get Brandt parts as I need a new terminal
block?

Thanks again

Laurence

[laurenceuk]

Re: Brandt Hob Problems – Is this Induction?

Thanks for responding bz but I forgot to mention that the customer said a red light comes on and beeps on the top when a pan is put on it. 😳

So there seems to be supply to the hob – but all things are worth checking.

Thanks again

Laurence

[laurenceuk]

Re: Samsung B1245S Wash M/c Door Handle – Supplier Please

Thanks folks,

I appreciate your response – sounds like Samsung bits not easy to get hold
of.

Laurence

[laurenceuk]

Re: Ind W161UK Wash M/c – New Belt Seems To Big

Thanks for your responses.

I went to fit a new belt today and though it is exactly the same as the
belt I fitted earlier as per Partfinder, this one was much harder to pull
over the pulley than the previous one.

I wonder if the first belt I fitted had been taken off returned machines or
those that had failed testing then put back in stock – by Indesit Company
I mean 😕

Thanks again

Laurence

[laurenceuk]

Re: Ind W161UK Wash M/c – New Belt Seems To Big

Thanks again Jim.

Laurence

[laurenceuk]

Re: Hotpoint T/Drier CTD00P – Replace Wheels with Bearing Ki

Thanks Jim

[laurenceuk]

Re: Hotpoint T/Drier CTD00P – Replace Wheels with Bearing Ki

That kit 1703080 looks like the one I require Jim, thanks, along with the air duct.

One last tip – if you can. Is it straight forward to fit the air duct?

Thanks again.

Laurence

[laurenceuk]

Re: Hotpoint T/Drier CTD00P – Replace Wheels with Bearing Ki

Thanks Jim,

An air duct will be ncessary.

Just to clarify:

The drum shaft and seal kit – is that different from the bearing kit 1703273
or will I need both?

Is the drum shaft pop riveted to the drum and this area is not affected,
do I need to change the shaft?

If the original drum is fine – why would I change it?

Thanks again.

Laurence

[laurenceuk]

Re: Glaring design faults

Back in the days when washing machines were – like men – washing
machines and I was stronger :cry:, one machine that was a nice earner
and satisfying to boot was an outer tub change of the Philco/Bendix
machines – 7147B ilk.

Remember, rust holes would appear around the motor and suspension
mounting areas and water would pour out.

I would have a recon spare outer tub always handy, having had the
rusted areas welded – the steel could cope with it then. I would then
smother the repaired area with deb glue – ahhhh the high`s of those
days, beats a freezer bag 😛 – and I could guarantee it would never leak
again.

The machines went on for years after.

Laurence

[laurenceuk]

Re: Bearing Problems With LG Intellowasher WM-1170FHB

Thanks Kirk,

Much appreciated.

Laurence

[laurenceuk]

Re: Are These Servis DW Motors Interchangeable?

Thanks for your help.

This confirms the motor I need 😀

Thanks again

Laurence

[laurenceuk]

Re: Are These Servis DW Motors Interchangeable?

Thanks

944215269

Laurence

[laurenceuk]

Re: Where Can I Source Tecnik Parts Please?

Thanks Andy

[Author]

Posts