[laurenceuk]

Re: Diplomat Oven and Hob Regulators Wanted – See Inside To

Thanks for the numbers Hyg-Dip.

The hob ones I can get from Masterpart at a good price.

But because they are moving warehouse they can’t supply the oven one (OROTCTLA) until it is moved across and they don’t know when that will be. They say they are 3 weeks behind.

Do you know anywhere else I could try – Connect don’t have any under that number.

Thanks

Laurence

[laurenceuk]

Re: Six Lux Washing Machine Drums Jammed – Not Bearings…

Thanks Mike,

Two very helpful pieces of info.

This will work on a couple of the machines 😀 I mentioned but others are nails and screws where the shanks have got between the lip fold of the drum but the heads can’t get through. The drums rotation has caused them to bite into the plastic tub and seize the drum.

Thanks again.

Laurence

[laurenceuk]

Re: Six Lux Washing Machine Drums Jammed – Not Bearings…

Thanks Martin,

Thought as much, just wanted to make sure I wasn’t missing a trick though.

Thanks again.

Laurence

[laurenceuk]

Re: Need Part For CDA CHX9SS Cooker Hood – Where Can I Get T

Thanks Franz,

Much appreciated.

[laurenceuk]

Re: Haier Wash Machine HWC1460TVEU Motor Required – Where Ca

Thanks Don,

Much appreciated.

Laurence

[laurenceuk]

Re: AEG Cooker Prod 948519007 – Fan Motor Pt. No.

Thanks Geoff – your brill…

Very much appreciated.

Laurence

[laurenceuk]

Re: Part No For Blomberg DW122/1 Dishwasher Part?

Thanks Dip

Laurence

[laurenceuk]

Re: Part No For Blomberg DW122/1 Dishwasher Part?

Thanks Andy,

That’s great – thanks for responding.

Laurence

[laurenceuk]

Re: Here’s One For the Miele Wash M/c Experts.

I know what you mean Phil,

Motor is fine but I did have the brush module off and I wondered if it could
be the brushes bedding back down. I have left them using it so it will be
interesting to see if it disappears or in fact they can continue with it like it
is.

I’m guessing too.

Laurence

[laurenceuk]

Re: Zanussi Washing M/c Error code? Identification Needed…

Thanks folks,

Just a question of elimination then.

Thanks again – gives me something to work on.

Laurence

[laurenceuk]

Re: Here’s One For the Miele Wash M/c Experts.

I fitted the motor and everything seemed fine. The fault disappeared until in
the the spin…

With a load of towels, the machine spun perfectly then came to the end of
the spin, rested for a few seconds then as the spin light moved to the finish
light the rinses light began to flash again.

Turning the selector to the 12 o clock position enables the door to be opened.

I was able to select programs just fine and repeat the spin prog several
times and each time the same occured.

The machine seems to do everything just fine except for this anomaly at the very end.

Any ideas please?

Laurence

[laurenceuk]

Re: Here’s One For the Miele Wash M/c Experts.

I’m really excited!!! 😀

Thanks for your responses, much appreciated.

Laurence

[laurenceuk]

Re: Zan ZWF12070W1 Auto Overheating?

That’s great Seamy.

Thanks for your response.

Laurence

[laurenceuk]

Re: Zan FS1455 Auto – What’s This Error Code Indicating?

Thanks Seamy!

[laurenceuk]

Re: Servis M6604W Door Handle Pt Number?

Thanks Rocket Man 😀

Laurence

[Author]

Posts