Forum Replies Created
-
Posts
-
Re: Need Wiring Diagram Zan ZUF270X Cooker See Pics
Thanks Colin,
You’re a star for such a rapid response.
The material shows the tags in different positions and on the clocks I have they are not labelled, I can id the relay tags and probably wont matter which lead goes to which tag but the other 2 (L&N) – will they matter which lead on which tag?
Or from the picture could you indicate which are: 1, 1a, L,N.
Thanks
Laurence
Re: Bosch Engineer Says Faulty But Is it?
Hence thought it was faulty because he selected ready-in time of 3hrs for a cottons 40 (say 2hrs 40mins length), it counted down 20 mins and started.
Bosch engineer didn`t appreciate this by the sounds of it either as he got the customer to get me to replace it. His machine is probably ok and I’m stuck with the replacement.
Re: Can This Zan zwd1471 Error Code Be Identified…
Thank you all for your excellent guidance.
It seems the low insulation reading was the problem.
Because they don’t use the td, isolating the heater has resolved it.
Result!
Thanks again.
Laurence
PS… Lesson re-learned – don’t take things for granted because they don’t appear to feature in the problem. ;o(
Re: Can This Zan zwd1471 Error Code Be Identified…
Hi Martin,
Even though (the machine was in the new house when they moved in) they have never used the dryer from new.
Laurence
Re: Hpt dw DWF 30P/7 (Bosch) pcb repair. Detail required.
Perfect Mark,
Had a couple of these in the past.
Much appreciated and thanks for making the effort.
Laurence
Re: Hpt dw DWF 30P/7 (Bosch) pcb repair. Detail required.
Posted by Eastlmark
Electronics as a hobby is fine and I must admit I found the recent Miele power board fuse and relay thread interesting as I have puzzled over those no drum action faults for many years.
Hi Mark
Can you post the link to this Miele thread please.
Laurence
Re: Doesn’t Fill… H/point WMD960 Fitted EMW Part But Diff
Thanks Hel_75,
That begs a question for me…
What is the way forward for me, re these programable machines in general?
Is it worth getting a reader from Connect – what equipment is needed to properly work on these pcb’s and where do I get the prog info?
Is there any info on the UKW site.
Insights would be helpful – thanks.
Laurence
Re: Doesn’t Fill… H/point WMD960 Fitted EMW Part But Diff
Thanks guys,
The main problem is no fill which was solved with the recon module but it introduced other problems.
The motor is of the brushless variety – induction motor.
Laurence
Re: Works For 5-10mins Then Fault Occurs Zan ZWD12270W1
Thanks Guys, for your input.
Yes, deffo checked wash heater as it certainly pointed to a heater problem.
Have not checked the dryer heater though.
How do I get into diagnostics please.
Laurence
Re: Zanussi Intergrated Dishwasher Fill Fault?
If it’s the type that when the filter is removed and there is a hidden chamber under the sump accessed by a small gap in the base of the sump. It is worth fishing around in there as in the past I have removed chunks of food, cling film etc which created fill problems – I think it is connected to the air gap chamber system.
Laurence
