[Lawrence]

Re: F+P Dishdrawer

someone remind me how to change the element on this ,I binned all the manuals when D&G dropped them ,Or does someone have a spare CD Rom about ?
Lawrence

[Lawrence]

Re: Sneaky…

could that explain why some seem to get an awful lot more repairs @ referals than others,Also what manufacturers are they rumoured to be ?
Lawrence

[Lawrence]

Re: rangemaster toledo 110

6438007028
Lawrence

[Lawrence]

Re: Smeg D/W – DWF410SS not starting

Agree with bassman it’s the disp coil ,It does some really weird things check for o/c as well as meter across .
Lawrence

[Lawrence]

Re: Creda/Hotpoint/Brandt Dishwasher

Goose ,does it actually need the adjuster? as normally they only fall off when the door cord breaks due to the lack of tension .
Just a thought
Lawrence

[Lawrence]

Re: Servis Modules

When I did Servis warranty work for GB we had all sorts of weird and wonderful faults.
The neoprene (pale colour) belts do stretch I had an MFI machine the week before christmas where the guy had been told it was the module by a local guy, I called changed the belt for a black one and away it went much to his astonishment .
On the Domar machine (Model no ends with an M) the edge connectors were a problem also had lots of 3022’s with 24 Volts to the pump sometimes module worked other times not when not suspect the harness.
Rule of thumb~ if the motor runs with no belt on then its normally belt tension.
If no no drum action full stop then its normally module but beware as the motors sometimes take out the modules look for a leak from the disp

Lawrence

[Lawrence]

Re: Questions

Hi
I Was chatting to my Old chap with regard to the machine and the ethos behind it last night .
He raised a point that I hadn’t thought of with regard to the spares distribution and availability ,What if say three/four years down the line there was a falling out with the spares distributor ,or a takeover or something similar ,Is there a commercial agreement in place to ensure a continual supply of spares further down the road ?
Lawrence

[Lawrence]

Re: Smeg KIV950RX Filter Light

It thinks the filter is blocked ,may be an air flow restriction there is a reset procedure in your handbook ,As I don’t think Smeg class it as a warranty job
Lawrence

[Lawrence]

Re: RANGEMASTER 110

from memory homespare do some ,they are called “continental” fixing,Genspares may be worth a go
Lawrence
I used to get mine from Paul massey

[Lawrence]

Re: Familiarisation with the Product / ISE Authorised

Saw the machine in the flesh for the first time this morning ,I am dead impressed.
Gentleman you have done us proud! roll on March.
They have all the key selling points
Self service
5 year parts
lots of features
engineer reccomendation
I haven’t been this happy since I left GBDAR
once again thanks for all the hard work behind the scenes ,now we get to fight back .
Lawrence

[Lawrence]

Re: DE DIETRICH DOD338XU DOUBLE OVEN

Hi Mike
Got your message
Part no’s
Element 77×2277 (I have on the van)
Bulb halogen 74×4482 (is it the same as connect ph19429 or wel8042
Limiter Stat 74×2403
there are another two bulbs listed 74×2403 & 74×3475 I think these are normal oven lamps

Lawrence

[Lawrence]

Re: Hpt Integrated Dw Brandt made BF ??

S/O at connect 🙁 will try masterpart as well as the de dietrich part
Lawrence

[Lawrence]

Re: De Deitrich DME101 we 1 /1

😀
Ta

[Lawrence]

Re: Moorgoods

mike1 wrote:COULD YOU TELL US WHAT THE PAY RATE IS MIKE

That would be handy to know as they have asked me for a price
Lawrence

[Lawrence]

Re: One Man Biz @ Home?

Couple of things –
I specifically went for a transit as I can then carry a new machine on the van all the time ,I am selling on average 2 a fortnight solely because I am there when I write off the machine ,So they don’t have to go to Currys etc A week ago we had a woman ring with a candy with smoke pouring from the motor ,Asking for the cost to call and fit a motor ,Duly quoted and declined she enquired if we sold new machines Debbie replied yes gave her the price,which included del ,inst,and disposal ,she said she would come back if interested .
An hour later she was on the phone when could we deliver ,That afternoon was the reply,Argos quoted a week plus charge to unpack etc approx the same for comet,curry’s and the rest .
my point is this if you have the abiliy to store one somewhere even your shed it gives you an edge ,But I take the point about a trailer Martin ,But it boils down to whether you want to sell or not I suppose.
Come february this machine will be a “project X”
I understand the reason for no credit ,But will payment by credit card be available ?

Also
If a machine is sold from the website in my postcode and the customer wants it installed who does the installation .
me or the level one that also covers my area ?
Lawrence

[Author]

Posts