lee8

Forum Replies Created

Viewing 15 posts - 301 through 315 (of 1,934 total)
  • Author
    Posts
  • in reply to: SMEG DWF614SS dishwasher not washing #420849
    lee8
    Participant

    Re: SMEG DWF614SS dishwasher not washing

    The hint, it’s a biggy is the comment “you can’t hear the water being pumped around”. I’d suggest checking the pump that does that, as opposed the drainage one.

    in reply to: Seimens, Bosch or Panasonic Washing Machine? #420897
    lee8
    Participant

    Re: Seimens, Bosch or Panasonic Washing Machine?

    Spanish engineered, Polish built, expensive service. I’d still get a Bosch, cheaper to buy, less reclaimed cotton insulation so a bit noisier but just as unreliable as the Siemens.

    in reply to: Programmer #420904
    lee8
    Participant

    Re: Programmer

    Gaffer tape.

    in reply to: Bosch WVD24460GB/03 reset code #420910
    lee8
    Participant

    Re: Bosch WVD24460GB/03 reset code

    Heating fault. May need rectifying first.

    in reply to: Caple C8711 (induction hob) #420913
    lee8
    Participant

    Re: Caple C8711 (induction hob)

    Yes. Just ensure the ventilation conforms to the installation instructions as cooling fans maybe fitted internally.

    in reply to: Strange prices in Portugal #420881
    lee8
    Participant

    Re: Strange prices in Portugal

    in reply to: Strange prices in Portugal #420880
    lee8
    Participant

    Re: Strange prices in Portugal

    in reply to: Strange prices in Portugal #420879
    lee8
    Participant

    Re: Strange prices in Portugal

    Not too bad in Northern Spain.

    in reply to: Zanussi ZWG1140M – Pump rattle #420661
    lee8
    Participant

    Re: Zanussi ZWG1140M – Pump rattle

    keithwilliams wrote:can i just point out that in my experience most people who complain about chinese junk, tend to have i phones, i pads,i macs
    etc. where do they think this stuff is made

    Knowledge is a useful tool.

    in reply to: Domestic Appliance Research #420738
    lee8
    Participant

    Re: Domestic Appliance Research

    1. It’s broken.
    2. Spend more for quality (researched incase it’s poor quality with a good quality badge)
    3. No price wouldn’t guide me too much.
    4. It would depend on which was the better product.

    Hopefully you’ll get more response from Jo public and not Mr smart arse.

    in reply to: Zanussi ZWG1140M – Pump rattle #420653
    lee8
    Participant

    Re: Zanussi ZWG1140M – Pump rattle

    I tried humor, Martin’s hard work though & is UK whitegoods resident ego. I do enjoy reading crap though, that’s pretty funny.

    in reply to: Beko WME7267W not spinning. #420725
    lee8
    Participant

    Re: Beko WME7267W not spinning.

    Check brushes first. Takes 30 seconds.

    in reply to: Zanussi ZWG1140M – Pump rattle #420650
    lee8
    Participant

    Re: Zanussi ZWG1140M – Pump rattle

    It’s no good moaning about Chinese “quality” when it’s an opinion not having a component on a component, it’s likely a manufacturer demanding not to have it fitted and it’s passed EU and UK safety guidance/regulation/standards. But hey like all ignorant Brits,let’s bring in immigration and then complain or demand crap and then blame those dumb Chinese for making it.

    in reply to: Bosch SGS5312GB/12 #420695
    lee8
    Participant

    Re: Bosch SGS5312GB/12

    Try cleaning around the square plastic button with an old tooth brush, sometimes they get crud which prevents it pushing back enough. If not change the switch, it’s not difficult.

    in reply to: Bosch f/f KGV31421GB/01 #420664
    lee8
    Participant

    Re: Bosch f/f KGV31421GB/01

    Tap into system and measure pressures, likely fault on that side, you’ve kinda answered your own question.

Viewing 15 posts - 301 through 315 (of 1,934 total)