loopey

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 406 total)
  • Author
    Posts
  • in reply to: zwd12270w #354942
    loopey
    Participant

    Re: zwd12270w

    thank you Martin yer a starr

    in reply to: Added to my watch list. #354718
    loopey
    Participant

    Re: Added to my watch list.

    been making them for years lol never thorte to sell them just gave them away ..

    in reply to: Interchangeability of Merloni dw motors. Or not? #354635
    loopey
    Participant

    Re: Interchangeability of Merloni dw motors. Or not?

    yes done it many times leavemetogetonwithit 2 minute job 🙂

    in reply to: Smeg DF612SE #354353
    loopey
    Participant

    Re: Smeg DF612SE

    no earth faults found … dang it for got about the dispenser solenoid , it was still shut hope thats the problem , thanks for the reminder 🙂

    in reply to: Candy CMD146-80 – No action #354276
    loopey
    Participant

    Re: Candy CMD146-80 – No action

    front option buttons stuck in ? ,Motorized selector motor o/c
    dry joint on pcb , also check the large 1,5uf cap on pcb can cause this , can get dry joints there its the one with a pile of glue next to it ,

    hth phil

    loopey
    Participant

    Re: Hoover dishwasher hod7715 80 wiring to heating element ?

    check your inbox you should have mail 🙂

    in reply to: candy cds120 semi int d/w 2006??? no worky #353635
    loopey
    Participant

    Re: candy cds120 semi int d/w 2006??? no worky

    showing 2 pcbs part numbers 41008104

    41016094
    ok has the fill valve have a pressure hose type pipe to it ? these can get airlocked with a drop of water especially when moved will stop it filling with water ,
    hth phil

    loopey
    Participant

    Re: Hoover dishwasher hod7715 80 wiring to heating element ?

    pm your email addy to me i have what you need 🙂

    on a closer look i think you were correct on your hind site 🙂

    in reply to: comet #354092
    loopey
    Participant

    Re: comet

    helo_75 wrote:you all seem to be enjoying this don’t you?

    there are a lot of peoples livelihoods at stake here remember

    not really helo i have friends that work at comet 😉 they are our main competitor though , so yes i would like them off
    my patch .. and i do feel sorry for any one that may loose a job any ways it may not happen 🙁

    oh by the way the ginger tosser says hello :offtopic:

    in reply to: Samsung SRL629 keeps blowing thermal fuses #354071
    loopey
    Participant

    Re: Samsung SRL629 keeps blowing thermal fuses

    put the sensor at the top it will do a shorter defrost 🙂

    in reply to: comet #351659
    loopey
    Participant
    in reply to: comet #354089
    loopey
    Participant

    Re: comet

    more here viewtopic.php?f=2&t=64318

    in reply to: VHD8142 flashing #353978
    loopey
    Participant

    Re: VHD8142 flashing

    yes i will 4th it wash heater low insulation every time

    in reply to: Baumatic, no model number #353691
    loopey
    Participant

    Re: Baumatic, no model number

    ok some times we miss the obvious it was the 2 option buttons ?
    dont no wich one it is as the writing on the bezal is rubbed off … DDOOOHHH

    in reply to: Woolite Horror #353771
    loopey
    Participant

    Re: Woolite Horror

    some times ken you really do surprise me . lol

Viewing 15 posts - 76 through 90 (of 406 total)