[martinm]

Re: Demise of Serviceforce agents

I currently work for a service force agent.. im woundering wether my job is safe coz they totaly rely on that work…can anyone advise me ?? Thanks

[martinm]

Re: Zanussi dryer ZDC37200W stops after 10mins??

its most likely the float sticking and then bringing on the tank full light…had quite a few of them with the float sticking

[martinm]

Re: BEKO oven OIF21300 WIRING DIAGRAM

thanks a lot that’s great

[martinm]

Re: siemans kg32s320gb/03 fridge freezer fridge no cold

is there perhaps another sensor somewhere on it that I haven’t seen?

[martinm]

Re: electrolux EOD982b grill element wiring

need a serial number as there are a few different wiring varations

[martinm]

Re: 2 Pole Voltage / Continuity testers.

one of these is good
http://www.play.com/Electronics/Electro … 641921&kw={keyword}

[martinm]

Re: miele da326l

thanks very much

[martinm]

Re: admiral gs2726edw-15

anyone

[martinm]

Re: Bosch dishwasher

Just curious what exactly is the impellor “JUG”?

[martinm]

Re: beko cda653fw/1

didnt realize ther was two in fridge .. i hae changed pcb fridge still feezing everything which of those sensors normally causes it…cherrs

[martinm]

Re: Beko CF6914W over freezing

spoke to beko today but the part number they gave me was for a therostat and theres not one on it. would you have the part number for that part please

[martinm]

Re: zan tc7103 leak etc

no pipes to worry about on these tank is at bottom gravity fed,
ive only seen them leaking when the condenser is not pushed in and enggaged with clips properly, quite commom

[martinm]

Re: ariston ald12uk wash cycle goes on for over 4 hours

Or is it possibly syphoning sometimes on rinses, i.e. too much waste hose pushed into standpipe?

[martinm]

Re: Beko CF6914W over freezing

where did you source a new thermister from?

[martinm]

Re: Beko CF6914W over freezing

where abouts on the back wall is easy accessable

[Author]

Posts