[mike412]

Re: BoschSGS43CO2GB/43 D/W.

Feedback…

It was the module.

Thanks Everyone who posted a reply.

Mike.

[mike412]

Re: Bosch SGS43A52GB/35 Dishwasher

To Keep You Posted……..

It was the module. Came back from QER with a shiny new mains tx fitted, fitted to machine and hey presto. Cost of repair by QER about £43 inc post etc, as compared with £80 or so for a new module. I like to use QER and EMW where possible, I think that they both provide an excellent service and are a great help to my business.

Thanks for your Help Guys…

Mike

[mike412]

Re: BoschSGS43CO2GB/43 D/W.

Thanks John,

Sorry, did not see your response until after I had posted my reply to Greg.
I will double check on the microswitch and “keep you posted”.

Cheers,
Mike.

[mike412]

Re: BoschSGS43CO2GB/43 D/W.

Thanks for the response Greg.
I will check when I go back to this job on tuesday. But you can see water clearly flowing through the sump hose and out through the outlet side of the metering tank, both at the same time.
I will also have a closer look at the waste to eliminate syphoning.
Cheers,
Mike.

[mike412]

Re: RoHS Compliance

Thanks John, I am now a wiser man.

I am glad that I was able to fit a Stat without unsafe levels of Polybromiated Biphenyl, The customer is one of my regular and very valued customers !

Cheers,

Mike.

[mike412]

Re: Bosch SGS43A52GB/35 Dishwasher

Thanks for your replies guys.

Had a word with QER today, yes they do repair this module. I had a quick look this evening, I would say that the primary on the mains tx is o/c, so will get this off to QER in the morning. I will keep you posted.

Regards,
Mike.

[mike412]

Re: Miele G572 Dishwasher

Thanks for your help guys- much appreciated.
regards,
mike.

[mike412]

Re: Miele G572 Dishwasher

Thanks for your help guys, but seamys solution does not sound right. This part is threaded(about 5/8 bsp) and has like a nozzle through the middle, looks as if the jet from this powers the next spray arm down. Sorry to be vague but as I said earlier, I have not seen this job myself. The serial number is 15376047

Regards, Mike.

[mike412]

Re: Bosch WFF2000GB/12 FD7707

Thanks Greg – Top Man!.
Mike.
P.S.
What a wonderful site this is.

[mike412]

Re: BEKO D2731 FW Dishwasher

Thanks Dave.

Could not find this on My mediator, but did find it on the website. Dont use the website very much, but there is a lot more information available on it.

Cheers,
Mike.

[mike412]

Re: Belling 550wide cooker

Thanks for the reply Dave.
I have had two of BELBA6200528 (082604107)
which are far too long, obviously for the 600mm format series.
I had a look at 5031683085973 but unfortunately no picture. I have sent an email off to Masterpart refering to this thread in the hope that they may be able to help, I will “keep you posted”.
Many thanks for your assistance,
Regards,
Mike.

[mike412]

Re: Belling 550wide cooker

Sorry, Missed the script off the last post. herewith the pics. Someone must have one of these gracing their kitchen, complete with model number plate.

Hopefully,

Mike.

[mike412]

Re: Belling 550wide cooker

[mike412]

Re: Whirlpool ADG7340 D/W 854234015810

Many Thanks for your replies.

I think that its more than likely that I have pierced the diaphragm with my mk 1 poker and prodder. I have ordered a new one and expect a result.

Cheers,
Mike

[mike412]

Re: CREDA 42350 Hob

Many Thanks Dave-Top Man!.
Mike.

[Author]

Posts