[mike412]

Re: Hotpoint WD71S flexi – circuit.

Thanks Jim.

I will PM my details straight away.

Regards,

Mike.

[mike412]

Re: Hotpoint WD71S flexi – circuit.

Hi Jim.

I am looking for one of these also, so is this one up for grabs, or did you flog it?.

Many Thanks,

Mike.

[mike412]

Re: Bosch WVD24520GB/02 Washer Dryer

Thanks for prompt reply Martin, Sounds like it might be kinked inlet hose or something like that. Am taking a look on monday.

Regards, Mike

[mike412]

Re: Spin Dryer Motor Mounts

Yup, they look like the ones I just parceled up for you. Not new but worth keeping for 25 years.

Regards, Mike

[mike412]

Re: Spin Dryer Motor Mounts

Hi .

Got a picture of what you want?.

I have 3 mounts which I THINK might be what you want. About to be chucked out as not seen the light of day for about 25years. You need to be quick, I shall be in CYPRUS on wednesday!.

Regards,

Mike

[mike412]

Re: Bosch WAE243630GB/02

Thanks Guys,

There is no user book available.

What has to be held down to change child lock?.

Much obliged,

Mike

[mike412]

Re: Heat Resistant String

Thanks Chris, I had’nt seen that one.

Regards,

Mike.

[mike412]

Re: Heat Resistant String

Thanks Martin for your response.

Thats the stuff, but I dont need the elements, they are far too long.

It looks like Qualtex do the elements I need for this application, but they do need supporting.

Regards,
Mike

[mike412]

Re: BELLING 315 FORUM WIREING DIAGRAM

Hi.

Check your email.

Regards,

Mike

[mike412]

Re: Hotpoint UT47X

Hi Helo.

Any chance of “me too” .

Got to go to one of these on wed with a bit of a snotty fault. A wiring diagram might be helpful.

debendomestic@ntlworld.com

Many Thanks in anticipation,

Mike

[mike412]

Re: Bosch WTL6305GB/05 Condensor Dryer.

Hi Beever,

Thanks for your prompt response to this one.

The machine does not stop when the float raises and closes the microswitch. There is no indication from the user instructions that the dryer should stop, only that the container full light should come on and the buzzer should sound when the drawer is full, this does not happen. the buzzer can be switched on and the volume altered, but it does not sound when the drawer is full. Looks like a module problem to me.

Thought I would have a little peek at the module, sans info.

Regards,
Mike

[mike412]

Re: Bosch WTL6305GB/05 Condensor Dryer.

Hi Folks,

Can anyone tell me, does the float switch at the sump just actuate a LED on/off function, or does it at the same time stop the dryer (via module) to prevent further condensate increase?

ManyThanks in anticipation,

Mike.

[mike412]

Re: Candy CIC60 01 Tumble Dryer

Thanks Chris, Received loud and clear.

Sorry Bob,

I did send an email to the link on your posting, this was on 23 Dec at 08.05. Its probably got mixed up in one of Santas sacks somewhere. Thanks for trying.

Regards,

Mike

[mike412]

Re: Bosch WTL6305GB/05 Condensor Dryer.

Thanks Martin.

I checked the float switch for correct operation at the idc plug adjacent to the pump. When the sump is empty the microswitch is open, if you fill the sump up with water the microswitch contacts close, but the light does not come on. Personally i think its something to do with the module, but I cant see what I would have done that would affect the module. (Fortunately for me the customer stood behind me and watched everything that I did.). I would like to have a bit more info on this one before I start diving into the module.

Many Thanks, Mike

[mike412]

Re: Candy CIC60 01 Tumble Dryer

Hi Guys.

My colleague is still in the thick and mucky on this one. I have not received anything from Bob Hope,who may be having some sort of problem with comms.

Has anyone else got wiring info for this please?

Regards, Mike

[Author]

Posts