Mo3426

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 64 total)
  • Author
    Posts
  • in reply to: Hoover DYN7164 310051781227 motor stammer #441928
    Mo3426
    Participant

    Re: Hoover DYN7164 310051781227 motor stammer

    had one last week were the splines on the drum pulley had stripped giving this effect untill i looked at the back of the machine

    in reply to: They don’t make them like they used to… #438195
    Mo3426
    Participant

    Re: They don’t make them like they used to…

    german built aeg brilliant machine

    in reply to: miele W1714 fault code 51 #437546
    Mo3426
    Participant

    Re: miele W1714 fault code 51

    ok thanks i will book it in

    in reply to: Engineer wanted for storage heater repair OX18 Brize Norton #435252
    Mo3426
    Participant

    Re: Engineer wanted for storage heater repair OX18 Brize Nor

    emailed you yesterday (wednesday) 🙂

    in reply to: Bark…….. repair referrals. #432221
    Mo3426
    Participant

    Re: Bark…….. repair referrals.

    had two enquiries from bark but both gas installations i dont do grrrrr

    in reply to: Belling Cooker 110 Are Halogen Rings Available?… #430937
    Mo3426
    Participant

    Re: Belling Cooker 110 Are Halogen Rings Available?…

    is that the old Belling (Enfield) farmhouse range cooker? its got doors that have no catches just sprung hinges
    usually a standard single circuit ring will work depending on how the regulater is wired
    i looked on cdsl and a right assortment of parts appeared so it seems they dont know either

    in reply to: I really must not take advantage of customers… #425879
    Mo3426
    Participant

    Re: I really must not take advantage of customers…

    Got a miele heat pump dryer 2009 model works but cooling fan motor bearings noisy connect (part number enquiry) want £250 for a new motor need to save a lot of leccy for that price (if any one has any ideas for a solution i would appreciate it… tried grease)

    in reply to: Very Badly Rusted Cooker #425640
    Mo3426
    Participant

    Re: Very Badly Rusted Cooker

    i have seen quite a few Beko Flavel and Leisure 500mm cookers in this sort of condition the lower panel is replaceable (3 screws underneath) spillage and damp atmosphere must play a part but the control panel and door tops are only painted and not enameled like many other makes another ploy perhaps to make sure they dont last too long.

    in reply to: Fan motor #424641
    Mo3426
    Participant

    Re: Fan motor

    i am guessing the unit is just lodged in place often other makes fit but
    it is usually a matter of which end the motor is fitted creda one fits several others but not sure of model numbers they are usually metal rather than plastic

    in reply to: Bosch WVD24520GB/07 #374678
    Mo3426
    Participant

    Re: Bosch WVD24520GB/07

    just checked the model number is very close and apologies i did get a couple of reply’s on the old post just no conclusion then i was about to scrap this machine and i took out the heater after seeing some fabric through the sump hose hole success !! doubt its a very common problem tho

    in reply to: Bosch WVD24520GB/07 #374673
    Mo3426
    Participant

    Re: Bosch WVD24520GB/07

    i had a similar problem with a bosch washer dryer and it turned out to be a lump of fabric had wedged its self around the wash heater removed it through the heater hole and machine is now fine cant remember the model number but i did post about it and got no replies

    in reply to: raw washing machines needed #415184
    Mo3426
    Participant

    Re: raw washing machines needed

    someone listing on ebay £25 each from cardif seems the same price for all makes?

    in reply to: Leisure RCM10CRS rhs conventional oven dead #420089
    Mo3426
    Participant

    Re: Leisure RCM10CRS rhs conventional oven dead

    not aware of one

    in reply to: Leisure RCM10CRS rhs conventional oven dead #420087
    Mo3426
    Participant

    Re: Leisure RCM10CRS rhs conventional oven dead

    assuming that its not the element

    in reply to: Leisure RCM10CRS rhs conventional oven dead #420086
    Mo3426
    Participant

    Re: Leisure RCM10CRS rhs conventional oven dead

    usually toc on these (Beko) on a metal bracket at back of oven could also be selector tho

Viewing 15 posts - 31 through 45 (of 64 total)