Forum Replies Created
-
Posts
-
Re: Hotpoint WT746 – H20 fault code?
Just been out to this and when I switched the machine on it made a lovely crack and tripped the electric.
On inspecting the module all the tracks around my original repair are burned and looks as if there may have been water/damp present.I have a couple of spare boards, but from different models, is it possible to change the eprom from one board to an other?
I did in the first place, offer to replace the board with an EMW one but the customer can’t afford it.
Re: Hotpoint WT746 – H20 fault code?
😳 I better get to spec savers Martin, I didn’t see it. 😳
Cheers anyway 😉
Re: Bosch WAE24363GB no fast spin
Bernie, you could try stripping the motor WD40 it give it a good clean and rebuild.
I had this a while back and it worked a treat.
This fault keeps cropping up on here and it always seems to work. 😉
Re: Hotpoint WF541 all lights flashing
😀 I have done quite a few of these now, the capacitor on the board solves it every time. That is a great tip on Jim’s link 😀
Re: Hotpoin WF320 not playing
Cheers Loopey,
Turned out to be the top fascia board, on/off and start buttons were stuck because the return spring plastic thingy had broken. Can’t think how that happened 😳 but a cheap fix anyway.
Thanks again everyone 😀
Re: Fill Hoses ?!? American top loader
😀 Sounds good Lawrence, let me know how much, and I will speak to my customer.
Re: Fill Hoses ?!? American top loader
😳 not yet, customer has family in USA and was going to try and get some sent over, but I haven’t heard from her to say that she got it sorted.
How much do you want for yours? I’ll check it out with her. 🙂
Cheers
Re: Fill Hoses ?!? American top loader
😥 You’re right Martin, it’s not like I’m going to be able to take the rest of the week off with the money from this job, and I certainly don’t need any sh*t to deal with.
So it looks like they are going to have to cough up for the money for the proper hoses. Can’t help thinking that there has to be a conversion kit available somewhere. 🙁Re: Fill Hoses ?!? American top loader
😀 That’s the sort of answer I was looking for.
Cheers Steve, I’ll give it a go.
Re: Baumatic single oven B147ss – Selector Switch
Hello mate, I don’t know the part number, but Connect distribution do it 8.56 + Vat their ref no. 5045171887765
Hope that helps
🙂
Re: BEKO WMA520S PCB?
Hello Jim,
I’ve got one here part number on the box is 2823010116
Connect distribution have them 33.53 + vat there part no. is (5045174262552)
Hope that helps 😉
Re: Bosch Classxx6 W/M WAE24363GB/05
Yes but it takes a not so old git to remember what the old gits said 😉 😆 😆
Re: Bosch Classxx6 W/M WAE24363GB/05
It’s only 4 screws, then it comes into four pieces. Easy peasy 20 minute job 8)
