[nelson]

Re: bosch wff2000 – prewash light flashing

Thanks fellas, I called back out yesterday, only for the machine to work completely as normal, which would from experience indicate that it probably is the water pump on the way out.
Thanks again. 🙂

[nelson]

Re: CDA BI1200WD H/C

Cheers Chris 😀

[nelson]

Re: CDA cl392 integrated washing machine

Cheers Rocketman

[nelson]

Re: CDA cl392 integrated washing machine

Thanks Andyvivo,
I have never used masterpart before so I have to wait for an account to be set up before I can access the site. I don’t suppose you know how much they want for that motor so I can give my customer a price?

Cheers

[nelson]

Re: Indesit WIA121

Cheers Wilf, I’ll speak to EMW. 🙂

[nelson]

Re: Hotpoint WF541

Hi John, I’ve had one like this before, I replaced the NTC which was faulty, but still got the same fault code and filling and emptying at the same time. I replaced the module with one from EMW and tightened the connections. That did the trick for me. good luck.

[nelson]

Re: DIPLOMAT TIMER

Hi Eastlmark, Sorry just back from hols, but yeah I’m pretty sure it’s the timer the machine just wont advance, no matter where you set it.

Cheers

[nelson]

Re: DIPLOMAT TIMER

Thanks for that fellas 😀

[nelson]

Re: Indesit WI141 Its got me beat!

Hello hotpnt and chris, I’ve just checked today and I am getting 8 flashes between pauses. ???? 😕 ????

Cheers

[nelson]

Re: Indesit WIDL126 Fault code 3 Ntc fault

Thanks Helo_75 & Robinsonrobbo,
I did nip up all the edge connectors, I do it as a habit these days, wasn’t sure if there was some sort of reset button pressing mularky.
But have to say my first thought was that the module had chucked the towel in.

Thanks anyway, I’ll see if EMW might do this one, before we get into “might aswell just get a new one” prices.

Cheers

[nelson]

Re: Indesit WI141 Its got me beat!

Thanks Helo_75 and Tony
It doesn’t have any leds except for the door locked led which flashes when it aborts. Also I nipped up the small plugs before I fitted the replacement board.

Cheers

[nelson]

Re: Hoover H160E – Wont start fast programs??

Cheers Tim. I’ll get one ordered. Thanks again. 😀

[nelson]

Re: Hotpoint WMA11 – I just cant pin this down??

Turned out my motor was no good. It was the tacho.
Thanks again 🙂

[nelson]

Re: Hotpoint WMA11 – I just cant pin this down??

Thanks suedehead1, I think I’ll give it an other look.

[nelson]

Re: Hotpoint WMA11 – I just cant pin this down??

Thanks fellas, I did check the wiring and it’s all tied away no signs of rubbing.

[Author]

Posts