oscar123

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 126 total)
1 2 3 4 5 6 7 8 9
  • Author
    Posts
  • March 30, 2015 at 12:08 pm in reply to: AWO/D5526 Dead #425919
    oscar123
    Participant

    Re: AWO/D5526 Dead

    Thanks for the link Jem

    It is a common fault on Whirlpool boards then? I have a few dryers with the same fault.. Thing is I have bought a new board from Connect and it is the same fault.. So not sure if I have missed something or Connect have sent me a dodgy board? it looks like it has been returned from some one else.. not the most difficult thing to swap the plastic container!

    March 30, 2015 at 11:53 am in reply to: AWO/D5526 Dead #425917
    oscar123
    Participant

    Re: AWO/D5526 Dead

    Yes the fault was the machine dead.. power in to main module but nothing. Checked socket and neutral etc..

    New module same fault but it does have an old green sticker on.. thinking maybe espares?

    February 24, 2015 at 12:56 pm in reply to: Noisy Bosch W5420XGB07 #424847
    oscar123
    Participant

    Re: Noisy Bosch W5420XGB07

    Hi Martin sorry for late reply been away for the weekend 🙂

    I haven’t no.. Very difficult to know where the noise is coming from due to it being a drum 🙁
    it seems to pulse a little;e like a drill but the noise rises and falls.

    I didn’t realise there was a magnet on the pulley. I take it it becomes loose?

    Oscar

    February 18, 2015 at 8:44 pm in reply to: WVD24520GB/08 #424836
    oscar123
    Participant

    Re: WVD24520GB/08

    Sorry guys I think I have sorted it.. holding wrong button Dohh!

    Press and hold finish in time button 🙂 sorry guys

    January 15, 2015 at 10:04 am in reply to: Indesit WIDL102UK lights flashing #423614
    oscar123
    Participant

    Re: Indesit WIDL102UK lights flashing

    thanks for the help 🙂

    January 14, 2015 at 5:58 pm in reply to: Indesit WIDL102UK lights flashing #423612
    oscar123
    Participant

    Re: Indesit WIDL102UK lights flashing

    Just got back from spec savers 🙂 two for one my arse! 🙂

    Found codes.. Can I take it there supposed to be vertical? if so F01 & F17 use the same light :rolls: but if there the right codes I can go from there 🙂

    Thanks Oscar

    December 11, 2014 at 7:38 pm in reply to: Zanussi Oven fault 006 #422620
    oscar123
    Participant

    Re: Zanussi Oven fault 006

    thanks Martin your a gem!

    December 11, 2014 at 7:14 pm in reply to: Zanussi Oven fault 006 #422618
    oscar123
    Participant

    Re: Zanussi Oven fault 006

    thanks for quick reply Martin!

    Sorry mate it is a ZDM891.. sorry didn’t get the PNC.

    December 1, 2014 at 2:25 pm in reply to: Samsung “HI” #422078
    oscar123
    Participant

    Re: Samsung "HI"

    Hi thanks for the reply and sorry to be late back, away at weekend 🙂
    Samsung WF7604NAW/XEU
    I have ordered a heater which is out of stock but didn’t want the customer waiting to find its something unrelated!
    Oscar

    November 10, 2014 at 6:15 pm in reply to: Smeg DC122W #421305
    oscar123
    Participant

    Re: Smeg DC122W

    O rings? I originally ordered and changed the air break O ring. As it still leaked I noticed water coming out of the air break over fill which faces to the tub side..

    Where are the O rings located?

    October 16, 2014 at 5:10 pm in reply to: Stoves Richmond 900E Hob flashing E4 #420185
    oscar123
    Participant

    Re: Stoves Richmond 900E Hob flashing E4

    Thanks for your reply Seamy 🙂 must upgrade my email as I only just received it! Spoke to customer and its not one I want to get involved with.. Apparently he has had a guy round changing boards and as Stoves involved. If they can’t fix 🙂
    Oscar

    July 7, 2014 at 11:38 am in reply to: Neff Dishwasher #416321
    oscar123
    Participant

    Re: Neff Dishwasher

    I have 🙂 no blockages.. even if there was a blockage would it fill with door open? think its a module but dont want to throw another on if something could be blowing them..

    March 24, 2014 at 2:12 pm in reply to: Indesit IWDC6105UK no pump #411438
    oscar123
    Participant

    Re: Indesit IWDC6105UK no pump

    Cheers guys.. NTC fault 🙂 sorted

    February 24, 2014 at 10:01 am in reply to: hotpoint dishwasher language problem #410127
    oscar123
    Participant

    Re: hotpoint dishwasher language problem

    Thanks Geoff very helpful as customer cant find manual 🙂

    February 13, 2014 at 1:07 pm in reply to: Bosch WVD24520GB/10 pausing for two days + on wash #409480
    oscar123
    Participant

    Re: Bosch WVD24520GB/10 pausing for two days + on wash

    thanks martin I will check the board..

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 126 total)
1 2 3 4 5 6 7 8 9