[oscar123]

Re: Homark WM600

Many thanks Dave that looks like the one.. I will put one on order
Oscar

[oscar123]

Re: Obselete Spares

Many Thanks Guys

[oscar123]

Re: Obselete Spares

White one?? I have managed to put the new machine on hold…. Zanussi never offered a different colour. I am sure a white one would be fine, better than £4/500 for a new machine.

Sorry about putting this in the wrong forum 🙁 just habbit..

[oscar123]

Re: WD420P Module

Removed capacitor off old board and fit, works like a dream.. thanks for the advise guys

[oscar123]

Re: WD420P Module

electrofix wrote:just to point out

if job is for a BANK hotpoint will see it as industrial so no guarentee watsoever if it went wrong the day after they bought it its tough

Dave

The machine is in a rented house (staff accomodation) I`m not keen on banks either but they pay well! This bank is the one I use so any charges I get just gets added to their next job 🙂

Tried the link for the capacitors (farnells) but they have a £20 min card charge.. thats 118 capacitors, but its still cheaper than another board though.

[oscar123]

Re: WD420P Module

The Job is for a bank which I do quite a bit of work for and they can`t find date of purchase or can`t be arsed to look! I have explained about the 5 year parts guarantee but they want me to repair.
I have no problem with investing in a card reader etc but is it worth it? they have been around for a while and this is the first time I have needed one.
How long does it take EWM to turn around a PCB?

[oscar123]

Re: Zanussi Bearing Kit

I don`t believe it! I had a pack on the van but thought they looked to small ie 800 bearing kit. 😳 Thanks for your swift reply

[oscar123]

Re: Neff Dishwasher

Thanks for the reply Paul, it turned out to be the outlet valve on the matrix. It was running with hardly any water so the heater was not coming on. Valve fitted and working fine.
Oscar

[oscar123]

Re: Hoover HND61515-80

Many thanks Chris for your speedy reply, I will check it out later..
Regards Oscar

[oscar123]

Re: Hoover Fault Code

Thanks for your reply Martin, my email is stevebyrne@jerseymail.co.uk your help is really appreciated.
Regards Oscar

[oscar123]

Re: Whirlpool AWO/D4505 Rinse/Spin light

Cheers Chris, will go back this afternoon and hopefully sort out.
Oscar

[oscar123]

Re: Low Pressure

Sorry Spimps, CPC?? who are they?

[oscar123]

Re: Low Pressure

Cheers for the reply Martin, though it was a local plumber who advised me to fit a shower pump, then a guy (manager from out the back) at the wholesaler thought it may not do the job. The flow is restricted on the dry… I may try it any way, unless…

[oscar123]

Re: Prima LPR828 Spares?

Many thanks Chris

[oscar123]

Re: WTE84102GB05

Sorry customer has been away so I have been unable to check the model number, model number is correct WTE84102GB/05, I have also just checked connects part finder and it is listed on there (wish I had thought of that before) lights flash in following sequence.. x = flashing light

X Drying
X Iron Dry
0 Cupboard
X Anti Crease

0 Container
0 Filter

Oscar

[Author]

Posts