[oscar123]

Just checked on Connect there are tow boards for this machine and I ordered the first one.. absolute @ankers if there is no warning ie serial number required 🙁

[oscar123]

It just runs for hours.. the circumstances pumps water for 2/3 seconds then it stops for 2/3 seconds then pumps again for 2/3 seconds over and over. Almost like there is not enough water but I don’t think theses have a pressure switch, flow switch on fill. If I push hard on the door it makes no difference. I have changed the module and pump and checked the wiring to both.

[oscar123]

Think Miele and double it.. £250 for the motor before postage! I least I tried.. I will let my customer know the bad news 🙁 thanks for the help anyway

[oscar123]

Dave your a star.. thanks for the advise

[oscar123]

Made in China 🙁 no booklet.. I know the type and possibly a universal one might do it.. Thanks for trying!

[oscar123]

thanks Dave that is a big help!

[oscar123]

Thanks for the reply Dave..

[oscar123]

Thanks Dave but I sorted it.. it just needed a bit of grey matter on the wiring.. in short supply here 🙂 I did get one down but the switch was different just needed to figure it out.

[oscar123]

Thanks for the reply.. definitely four wires on this one but hopefully it will be the same! I did guess and put it on a cycle and it seemed okay but they have rang me back to say it is going E11 🙂

[oscar123]

Yes it has done it several times..

[oscar123]

thanks for the swift reply.. I hope “sidekick” is not referring to my friend when I was a young lad? as he now lives in America 🙂

[oscar123]

Thanks for the tech info very much appreciated.. Last error was EF5. Run the machine empty and it spun no problem. Put a good size load in and it wouldn’t spin.. put more load in and tried again very patiently :confused:… No spin. Motor or control board? gut says board so one order but if there is a way to check for sure it would be appreciated..

[oscar123]

Thanks for the reply.. PNC is 914910415-02 and It is button controlled

[oscar123]

Thanks Dave.. If I can get the seal I probably have the bearings on the van.. not paying £100 for 2 bearings the robbing b@@{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}$rds

[oscar123]

A Massive help Dave thankyou very much for going to the trouble!

[Author]

Posts