Penguin45

Forum Replies Created

Viewing 15 posts - 15,556 through 15,570 (of 19,678 total)
1 2 3 … 1,037 1,038 1,039 … 1,310 1,311 1,312
  • Author
    Posts
  • March 18, 2006 at 5:32 pm in reply to: Neff 1452 oven elements not working #169919
    Penguin45
    Participant

    Re: Neff 1452 oven elements not working

    dedics wrote:the slightly worrying thing is what overheated to make it cut out….

    Fan motor running slow? If you have the early version with the heavy alloy fan blade they were very prone to slow running. Or, thermostat not cycling properly.

    Temperature limiter is p/no 057895 – spares@ukwhitegoods.co.uk will be able to get you one promptly.

    Regards,
    Penguin45.

    March 18, 2006 at 5:24 pm in reply to: Electrolux Fan Oven Not heating. #169940
    Penguin45
    Participant

    Re: Electrolux Fan Oven Not heating.

    Element is behind the rear inner panel of the oven. If required, the p/no for the element is 3192086-10/5 – an email to spares@ukwhitegoods.co.uk for prices and ordering.

    Power off when investigating.

    Regards,
    Penguin45.

    March 18, 2006 at 5:01 pm in reply to: Servis M3008W #169934
    Penguin45
    Participant

    Re: Servis M3008W

    Or the elasticated drive belt – belt tension should seem to be excessive.

    Chris.

    March 18, 2006 at 12:30 am in reply to: 7 year old AEG W/ Drier #169894
    Penguin45
    Participant

    Re: 7 year old AEG W/ Drier

    Minutes – the Russians have launched………..
    Chris.

    March 17, 2006 at 11:59 pm in reply to: 7 year old AEG W/ Drier #169892
    Penguin45
    Participant

    Re: 7 year old AEG W/ Drier

    It should settle to the correct position within a few seconds. The gears do get jammed up and clunk away for ages. The drain pump is partially switched through the soap box, so defo worth investigating.

    Chris.

    March 17, 2006 at 10:24 pm in reply to: Site very slow.? #137980
    Penguin45
    Participant

    Re: Site very slow.?

    kwatt wrote:to use Zone Alarm as a firewall

    Mrs P, she say “You’ll regret it”….

    Chris.

    March 17, 2006 at 10:19 pm in reply to: Gunkol/Teba electric oven – glass door needed #169868
    Penguin45
    Participant

    Re: Gunkol/Teba electric oven – glass door needed

    PM r600a for bits.

    Penguin45.

    March 17, 2006 at 10:07 pm in reply to: Indesit we16 F10 #169875
    Penguin45
    Participant

    Re: Indesit we16 F10

    Geoffo84 wrote:so I suspect it may be related to the water level sensor?

    Correct – check air chamber for sludging, air hose for kinks/holes.

    Power off if investigating, click the link below for pro help if you’re not sure,

    Regards,
    Penguin45.

    March 17, 2006 at 9:28 pm in reply to: Smeg DWF64SSE #169872
    Penguin45
    Participant

    Re: Smeg DWF64SSE

    The soap dispenser is a notorious cause of computer problems; replacement is the only option.

    P/no 812890061 – an email to spares@ukwhitegoods.co.uk for prices and ordering.

    Power off when investigating please.

    Regards,
    Penguin45.

    March 17, 2006 at 9:15 pm in reply to: Rangemaster 110 #168980
    Penguin45
    Participant

    Re: Rangemaster 110

    Received and fitted.

    Thank you Dave,
    Chris.

    March 17, 2006 at 9:11 pm in reply to: 7 year old AEG W/ Drier #169890
    Penguin45
    Participant

    Re: 7 year old AEG W/ Drier

    Motorised soapbox top going clunk clunk clunk at the same time? They can spring free and select correctly, eventually.

    Chris.

    March 17, 2006 at 8:10 pm in reply to: Bosch washer enr:WFO2864GB/01 #169882
    Penguin45
    Participant

    Re: Bosch washer enr:WFO2864GB/01

    whitevanman wrote:why has the pres sw got 4 wires (thinking 11-12-13 ?)

    Flood protection.
    Chris.

    March 17, 2006 at 8:05 pm in reply to: miele door seal #169861
    Penguin45
    Participant

    Re: miele door seal

    18-ML-10 from Maddocks will cost you a fraction of Miele’s price……..

    Chris.

    March 17, 2006 at 1:15 am in reply to: Error code 9 on SmartDrive 703 #169561
    Penguin45
    Participant

    Re: Error code 9 on SmartDrive 703

    Cody,
    It’s a GW703, phase 3, white panel, green and yellow buttons. It should have a green controller with water cooling. 12v 15ohm valves, reed switch lid switching and a Selni pump.

    As you should know as an F+P employee.

    If you don’t have the correct technical info, please stop guessing at what may be going on with these appliances.

    Your latest post tells SB how to put the appliance into the Option Adjustment Mode – utterly irrelevant to a machine which has a set-up problem or possibly a faulty board.

    Get it together or please stop posting advice – we can – and will – moderate your posts.

    Regards,
    Penguin45.

    March 17, 2006 at 12:50 am in reply to: “Ooooh Matron” ? #164492
    Penguin45
    Participant

    Re: One to keep an eye on.

    Hmm – the aforementioned Robelee is asking basic questions in the public forums (AEG door boot). He has trade access – should he?

    Chris.

  • Author
    Posts
Viewing 15 posts - 15,556 through 15,570 (of 19,678 total)
1 2 3 … 1,037 1,038 1,039 … 1,310 1,311 1,312