Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Speaking of vacuums…
http://www.ukwhitegoods.co.uk/modules.p … _photo.php
Make your own mind up……….
Chris.
Penguin45
ParticipantRe: hygena APL 3418 grill element
Howzabout 14HY16 from Maddocks @ £11.07? Cheap enough……
Chris.Penguin45
ParticipantRe: Ariston programme selector switch
Off the top of my head, I don’t remember but you can still get a nice reading in kOhms and it’s out of tolerance – click, click, click…….
Chris.
Penguin45
ParticipantRe: Crazy
You employed or franchise, Johnny?
Chris.
Penguin45
ParticipantRe: Speaking of vacuums…
What is it then? It surely isn’t a cloven hoof….
Chris.
January 9, 2006 at 10:27 pm in reply to: F&P Smart Drive 501 Attempts to Start and Fails / Beeps #159535Penguin45
ParticipantRe: F&P Smart Drive 501 Attempts to Start and Fails / Be
Good progress. Cold water valve is a 12v proportional one, check the filter mesh on the inlet for clogging. I am told that the valve can behave strangely as it ages. P/no is 425320 should you wish to order a replacement.
Regards,
Penguin45.Penguin45
ParticipantRe: Siemens grill element only half works
Now you’re talking. Double element, centre part almost certainly failed.
P/no is 471375, about £45 from memory, email to spares@ukwhitegoods.co.uk if you wish to order.
Ideally, you should meter the element to check its condition – power off of course. If you’re not sure, click the link below for a UKW engineer.
Regards,
Penguin45.Penguin45
ParticipantRe: Siemens grill element only half works
That doesn’t quite make sense – it’s a single circuit grill element, so you should get heat throughout if it works and nothing if it doesn’t.
Can you please post the full eNr number from the rating plate around the door, may be able to narrow it down a bit more with that.
Regards,
Penguin45.January 9, 2006 at 9:14 pm in reply to: Blomberg WA1300 – Won’t flush powder or start rinse cycles #160361Penguin45
ParticipantRe: Blomberg WA1300 – Won’t flush powder or start rinse cycl
That’s the old Ocean-built Blomberg, IIRC. One of these:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=415
should do the trick.Always assuming that the cold supply is on…….. Those little blue tags wear and don’t always turn the water on. 😀
Power off if doing this yourself.
Regards,
Penguin45.Penguin45
ParticipantRe: smeg error code E7
Pressure switch does not detect water level drop in time allowed. You’ve got some sort of blockage…………
Power off if going in to investigate.
Regards,
Penguin45.Penguin45
ParticipantRe: Fisher & Paykel Smartdrive 708 Won’t wash
Let us know how it pans out please.
Penguin45.
Penguin45
ParticipantRe: indesit w123 uk bg
Claire – we cannot, for a variety of reasons give you a detailed, blow by blow account of how to repair your appliance. We can only offer you some guidance and hope you can use the information.
If you are not sure how to interpret our help, please get pro assistance. You can click the link below for a UKW engineer in your area.
Regards,
Penguin45.Penguin45
ParticipantRe: Ariston Margherita 2000 – I also have a problem!
Interesting site – principle explained is entirely correct, even has a safety warning. If you need to access the airchamber and hose, you will need to work from under the machine, with the power off of course.
Spares if required can be obtained through spares@ukwhitegoods.co.uk with remarkable efficiency.
Regards,
Penguin45.Penguin45
ParticipantRe: Neff Washer Dryer not Drying
It was a good game – at least we scored! I reckon if your keeper really wants to leave, they’ll sign Acton like a flash.
I posted that before the game BTW…… Had no idea what would happen. Honest. 😆
Penguin45.
Penguin45
ParticipantRe: indesit w123 uk bg
If the count is 10, you have a problem with the water level control system. The level switch needs checking for function, the air hose for blockages or leaks.
Power off if doing this yourself.
Regards,
Penguin45. -
AuthorPosts
