Forum Replies Created
-
Posts
-
Re: Samsung P1253 any good?
The Bosch also has a 2 year warranty. Both will do your laundry to an acceptable standard. I think you’ll find the major difference will show when service issues arise. You have a far higher chance of a first time repair under guarantee or through an independent repairer with the Bosch.
Regards,
Penguin45.Re: BOSCH Soap Dispenser problem
Lid p/no 166621 £13.16; spring kit 166630 £2.47. Or, 490467, dispenser complete. All plus VAT + dely. Email to spares@ukwhitegoods.co.uk for ordering and confirmed prices.
Regards,
Penguin45.Re: Bosch WFF2000 drum not rotating
Thanks for that. These should be the ones you need:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=435If you’re not doing the work yourself, the engineer will bill you for an hour – check the rate when you make the appointment to avoid surprises. You can click the link below for a UKW engineer if you wish.
If doing the work yourself, power off please.
Regards,
Pengun45.Re: Bosch WFF2000 drum not rotating
Almost certainly the carbon brushes in the motor will have worn out. We will need the full designation to identify them – check the inside of the door for the e/nr number – should end GB/–, as there are several different versions.
The prewash flashing merely identifies that there is a fault, not what it is.
Get back to us,
Penguin45.Re: What a year eh!
Dave_Conway wrote:short a**ed slaphead
Watch it with the short references 😀 . The hair’s all mine :rotfl:
To be serious for just a moment, 2004 was chaotic to say the least, this year has seen UKW move forward in a cohesive and co-ordinated way – the professional presentation of the site to the outside world has been outstanding. The achievements have been pretty stunning as well.
My personal thanks and well done to all the “management team”, outstanding job. Not bad for something designed to help engineers talk to each other.
Here’s to 2006, may we go from strength to strength.
And I still can’t get a full sized dishwasher into our kitchen…..
Happy new year to all,
Chris.Re: Zanussu condenser dryer TC-470
The condenser housing (big box section in the bottom) is blocked somewhere, preventing water from draining down into the tank. Instead, it’s backing up into the fan chamber and being thrown into the heater.
Demolition time – power off, of course.
Regards,
Penguin45.Re: Your reccomendations on putting drier outside?
Let’s have a piccie of the finished job! Don’t forget the RCD…….
Penguin45.
Re: Fan motor problem – Diplomat ADP 3702 electric fan oven
I am advised that the alternative part in the link may not be a suitable replacement.
Contact spares@ukwhitegoods.co.uk with the genuine part number for pricing and delivery.
Regards,
Penguin45.Re: remove thread?
In case he comes back to anyone else, I have deleted a post from Cornflakes (Graham) advising a punter to test for power at the fan motor of his Hygena oven……..
Chris.
Re: Indesit WG9 not Spinning
That’s the timer unit – look for a printed circuit board. They range from £45 – £85 depending on which one’s fitted – post up the numbers on the heatsink for an exact price.
Penguin45.
Re: Indesit WG9 not Spinning
It will almost certainly be visibly blown if you had a pop noise…..
Penguin45.
Re: Fan motor problem – Diplomat ADP 3702 electric fan oven
Fan motor failure – slow under power and free when turned by hand is a classic sympton.
Genuine part number is 062081581800, or this:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=423
is a pattern alternative.Power off before attempting replacement.
Regards,
Penguin45.Re: Indesit WG9 not Spinning
There was a WG924……. Check labels for info, not control panel. There should be one in the door porthole and one on the rear of the machine. If it is a WG924, you have almost certainly blown the electronic board.
Power off if you are investigating further.
Regards,
Penguin45.Re: Homark Fan Oven
http://www.ukwhitegoods.co.uk/modules.p … cts_id=308
Is what you want.
Regards,
Penguin45.
