Forum Replies Created
-
Posts
-
Re: dishwasher whirlpool adg 934
Ositpadi, I’m sorry, but I just do not understand what it is that you are trying to tell us about your machine.
1/ Is the machine filling up with water and then leaking water onto the floor?
2/ Or is it not taking the water out of the machine?If the start light is flashing constantly, this would suggest a problem with the TEMPERATURE SENSOR, but I cannot be sure based on what you have told us so far.
Penguin45.
Re: De Longhi DFS090DO range.
No, no, no – Goatboy’s got a fleece, I’ve got plumage….
PM sent.
Chris.
Re: Whirlpool AWZ9993/AWZ8577
European machine, Jackster – See HERE for original discussion.
Penguin45.
Re: AEG Favourit 44050VI i/d/w.
cab wrote:have you ran the diagnostic??
Yes – drain pump runs for seven seconds and then stops.
cab wrote:do you need a service manual?
Sorted on that front, TVM.
Chris.
Re: In search of the fourth cord
Anybody got any idea what it is he’s trying to tell me?
http://www.ukwhitegoods.co.uk/modules.p … ic&t=48951
I assume English isn’t his first language due to the odd phrasing, but it doesn’t make sense.
Chris.]
Re: Whirlpool with green light flashing
Flow meter failure. Again.
Use “Search”, put ‘flow AND meter AND whirlpool’ in and select Dishwasher forum – loads of results.
Penguin45.
Re: Teka DW6 40FI
So you’ve got no circulation then? Pump is either jammed or seized, or the start-run capacitor has failed.
Power off if you intend to investigate this yourself.
Penguin45.
Re: dishwasher whirlpool adg 934
No, you’re not forgotten, but trying to understand your problem is difficult.
The machine has a flood protection system consisting of a polystyrene float and a microswitch in the tray under the machine. If there is a water leak, the tray fills with water and the flood protection system cuts off the programme and runs the drain pump – this may be the noise you are hearing. If you have water on the floor as well, the leak should be pretty easy to find as it will be a big one – hose off or split would be the obvious one to look for.
I’m afraid you’ll have to pull it out and get the covers off and look – there’s no other way. Power off for anything other than observation.
Penguin45.
Re: tricity 7448 dryer
Put 572 on the front should get you started – nothing coming up on Masterpart though. 🙁
Chris.
